Hello,
QLandkarteGT shows by selection of Waypoint -> Download the error:
"Die Version des Treibers "/usr/lib/qlandkartegt/libEtrexVistaHCx.so"
simmt nicht mit der von QLandkarte GT erwarteten Version "01.17" überein"
in english:
"The driver version /usr/lib/qlandkartegt/libEtrexVistaHCx.so does not
match the from QLandkarte GT expected "01.17""
Devices and data transfer contains:
serieller Anschluss: /dev/ttyUSB0
Typ: EtrexVistaHCx
Schriftsatz: Utf-8
$ uname -a
Linux i5host 2.6.32-31-generic #61-Ubuntu SMP Fri Apr 8 18:25:51 UTC
2011 x86_64 GNU/Linux
$ lsusb
Bus 006 Device 003: ID 091e:0003 Garmin International GPSmap (various
models)
$ demesg
[ 590.230022] usb 6-1: new full speed USB device using uhci_hcd and
address 3
[ 590.380835] usb 6-1: configuration #1 chosen from 1 choice
[ 590.382760] usbserial_generic 6-1:1.0: generic converter detected
[ 590.382836] usb 6-1: generic converter now attached to ttyUSB0*
*
$ cat /etc/udev/rules.d/51-garmin.rules
ATTRS{idVendor}=="091e", ATTRS{idProduct}=="0003", MODE="0660",
GROUP="plugdev"
$ lsmod | grep garmin
returns nothing
$ sudo gpsbabel -D9 -t -i garmin -f /dev/ttyS1 -o gpx -F tracks.txt
GPSBabel Version: 1.3.6
[ERROR] SERIAL: tcgetattr error: Input/output error
[ERROR] Cannot open serial port '/dev/ttyS1'
GARMIN:Can't init /dev/ttyS1
I've followed the instructions of
http://wiki.ubuntuusers.de/QLandkarteGT. The driver is from the
referenced side:
http://sourceforge.net/projects/qlandkartegt/files/garmindev/
Regards
Matthias
------------------------------------------------------------------------------
WhatsUp Gold - Download Free Network Management Software
The most intuitive, comprehensive, and cost-effective network
management toolset available today. Delivers lowest initial
acquisition cost and overall TCO of any competing solution.
http://p.sf.net/sfu/whatsupgold-sd
_______________________________________________
Qlandkartegt-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
