Thanks Oliver for this start page,
I just sent the beta version to a friend who never used QMapShack
before. Maybe he will have some feedback to share.
Concerning TwoNav Aventura, this is unfortunately too expensive to
replace my Etrex 30x on my MTB handle bar...
zero
Le 17.03.2018 19:23, Oliver Eichler a écrit :
> Thanks Helmut!
>
> btw, this version has also updated detection for newer Twonav devices.
> CompeGPS launched a new version of their Aventura GPS device. This is the
> first new GPS device other than a Garmin since years with a spec that is
> worth
> considering it for real action. Mainly because it can be operated by keys.
> This turned out to be crucial in real bad weather, the only condition you
> really need a GPS device for orientation.
>
> Oliver
>
> Am Samstag, 17. März 2018, 18:26:47 CET schrieb Helmut Schmidt: Test release
> for Windows:
> https://bitbucket.org/huirad/test/downloads/QMapShack_3648__InitialHelpText.
> zip It's not an installer this time, so you don't mess up you regular
> installation.
> Just unzip into a directory of your choice and double-click on
> qmapshack.exe or start it from the command line
>
> Am 17.03.2018 um 16:47 schrieb Oliver Eichler: Hi,
>
> there are always complains that QMapShack is hard to start and not
> intuitive. Well if it comes to intuition I guess most users simply mix
> intuitive usage with "not the same I am used to" and we can discuss
> endlessly.
>
> However I do acknowledge that the first steps are not easy to do as you
> have to download and setup quite some stuff from the beginning. Wolfgang
> already wrote the Quick Start Guide which is a great help for those
> looking at the Wiki first, before complaining about missing
> documentation. But I think the majority will not.
>
> That's why I started to boil it down even more. If you start QMS the first
> time you will see a very short description of the next steps to do. It's
> full of links that will trigger the necessary dialogs or direct you to
> the right Wiki page.
>
> I would like you to test it. Right now it's only in the repo. So you have
> to compile the code yourself. But maybe Helmut can do a quick test
> release for Windows.
>
> To see the new help, you can either open a new map view or start QMapShack
> from the command line:
>
> qmapshack -c test.cfg
>
> This will not use your current configuration but use a completely new one.
> If you remove test.cfg later you can start from scratch over and over
> again.
>
> Let's consolidate the help text before it's translated.
>
> Thanks
>
> Oliver
>
> --------------------------------------------------------------------------
> ---- Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Qlandkartegt-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
> ----------------------------------------------------------------------------
> -- Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Qlandkartegt-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Qlandkartegt-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Qlandkartegt-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
