Hi Piet, Currently I cannot check this on a Debian Bullseye system. (Perhaps) I will do it a little bit later.
You can check the output of the linker/compiler command for creating libgdal.so. Normally you should find something like: -L/home/user/QMSDEVDIR/usr/lib -lproj My build was made with proj-8.0.0 and gdal-3.2.2 perhaps something changed with gdal-3.3.0? Perhaps this is also a workaround for you, using gdal-3.2.2. If I use ./configure --help with gdal-3.2.2 I see that -with-proj is supported. I will try to make a build with proj-8.0.1 and gdal-3.3.0 at the weekend on my Ubuntu system to check if it works there. If this is the case I will try to check it on a Debian Bullseye system too. I hope this helps a little bit, Torsten On 28.05.21 08:28, APM wrote: > > Hi Thorsten, > > > thank you for your information. > > > I use Debian Bullseye. Unfortunately the introduction does not work for me. > > > After compiling proj-8.0.1.tar.gz I get the /home/user/QMSDEVDIR/usr/lib/ with > > libproj.so.22.1.0 in it and two links libproj.so.22 and libproj.so to > libproj.so.22.1.0. > > > I configure gdal with > > > ./configure --prefix=/home/user/QMSDEVDIR/usr --without-libtool > --with-proj=/home/user/QMSDEVDIR/usr --with-geotiff=internal > > without errors. > > > Compiling gdal stops with a warning: > > /usr/bin/ld: warning: libproj.so.22/usr/bin/ld, needed by > /home/user/src/gdal-3.3.0/libgdal.so, not found (try using -rpath or > -rpath-link) > > and a couple of messages like "undefined reference to `proj_" > > > Maybe --with-proj=/home/user/QMSDEVDIR/usr is not recognized? > > > Kind regards > > > Piet > > > Am 26.05.21 um 23:29 schrieb Torsten Metzner: >> Hi, >> >> Here: >> https://www.naviboard.de/thread/65969-gel%C3%B6st-qms-l%C3%A4sst-sich-nicht-mehr-kompilieren/?postID=530449#post530449 >> <https://www.naviboard.de/thread/65969-gel%C3%B6st-qms-l%C3%A4sst-sich-nicht-mehr-kompilieren/?postID=530449#post530449> >> >> I gave an introduction how to build it under Ubuntu 20.04.2 LTS and avoiding >> any conflict with system libraries. >> >> It is in German but I hope one can understand it. >> >> Torsten >> >> On 26.05.21 17:56, HerbertFisel wrote: >>> Hi, >>> trying to translate V1.16.0 results in the ccmake error: >>> >>> By not providing "FindPROJ.cmake" in CMAKE_MODULE_PATH this project >>> >>>has >>> >>> asked CMake to find a package configuration file provided by "PROJ", >>> >>>but >>> >>> CMake did not find one. >>> >>> >>> >>> Could not find a package configuration file provided by "PROJ" with >>> >>>any of >>> >>> the following names: >>> >>> >>> >>> PROJConfig.cmake >>> >>> proj-config.cmake >>> >>> >>> >>> Add the installation prefix of "PROJ" to CMAKE_PREFIX_PATH or set >>> >>> "PROJ_DIR" to a directory containing one of the above files. If >>> >>>"PROJ" >>> >>> provides a separate development package or SDK, be sure it has been >>> >>> installed. >>> >>> I assume this is because QmapShack has switched to Proj 8 and my system >>> >>> DISTRIB_ID=Ubuntu >>> DISTRIB_RELEASE=20.04 >>> DISTRIB_CODENAME=focal >>> DISTRIB_DESCRIPTION="Ubuntu 20.04.2 LTS" >>> >>> has installed >>> >>> >dpkg-query -W proj-bin >>> proj-bin 7.0.0-1~bionic0. >>> >>> So I translated and installed proj-8.0.1 from source (proj.org) and >>> installed >>> it on the default destination path >>> /usr/local/ with all its subdirectories bin, include, lib, etc. >>> >>> My question: How can I cause ccmake to use the manual installed proj version >>> from that destination instead the system >>> installed version 7 ? >>> Or does that not work at all ? >>> >>> Can anyone give me a hint. >>> Thanks in advance >>> Herbert >>> >>> >>> >>> >>> >>> Am 24.05.21 um 11:42 schrieb Oliver Eichler: >>>> Hi, >>>> >>>> release time with a minor version upgrade. This is because of a new >>>> feature: >>>> POI collections. Thanks to Henri for the work. Also thanks to Wolfgang >>>> documenting the topic in the wiki. >>>> >>>> https://github.com/Maproom/qmapshack/wiki/DocGisItemsPOI >>>> >>>> Another big step is switching to Proj 8. On older distributions this will >>>> give you some headaches. Maybe a good moment to upgrade. >>>> >>>> As usual there has been a lot of bug fixig, too. I hope we cought more bugs >>>> than introducing others with the new features. >>>> >>>> For all the details see the change log and the attached tickets. >>>> >>>> Enjoy the release! >>>> >>>> Oliver >>>> >>>> >>>> >>>> [QMS-220] "Select items from map" misses items >>>> [QMS-275] Routino: Add Spanish and Czech as selectable languages for turn >>>> instructions >>>> [QMS-279] Track metrics not updated when using UNDO / REDO in Edit mode >>>> [QMS-282] Tags icons/rating disappear from workspace after saving and >>>> closing >>>> a project >>>> [QMS-285] WMTS-based maps aren't restored correctly >>>> [QMS-297] Add GUI framework for POI databases >>>> [QMS-299] CEnergyCycling is storing it's configuration in the `General` >>>> section instead of it's own. >>>> [QMS-301] Load POI file >>>> [QMS-303] Add POI icons >>>> [QMS-307] Optimization of POI query >>>> [QMS-311] Automatically save projects to device >>>> [QMS-313] UX improvements for POIs >>>> [QMS-314] Fix/Add POI categories >>>> [QMS-315] Make POI Icons User-Selectable >>>> [QMS-317] Enable user to add POI to project via right-click >>>> [QMS-318] Change poi_t to use radians >>>> [QMS-321] Improve name selection for POI >>>> [QMS-322] Make POIs show up in 'Select Items On Map' >>>> [QMS-337] Upgrade to Proj 8 API >>>> [QMS-343] .fit files from Suunto app have many trackpoints with elevation >>>> = 0 >>>> [QMS-344] Better integration of new PROJ lib into cmake build system >>>> [QMS-349] Upgrade to Quazip Qt5 V1.x >>>> [QMS-353] "Select Items on Map" does not update when items are removed >>>> [QMS-354] Refactor the code to get rid of clazy warnings >>>> [QMS-360] Fix compile flags for Windows 64bit >>>> [QMS-362] Fit files containing more than one developer data ID cannot be >>>> opened. e.g. from a Garmin FR 935 and a connected Stryd footpod >>>> [QMS-363] GIS items missing in projects loaded from file or database >>>> [QMS-371] Crash while loading geocache from TwoNav device >>>> [QMS-373] Refine templates to hide comments >>>> [QMS-375] On-screen profile window has no close button >>>> [QMS-378] Add option to link map views >>>> [QMS-380] Toggle fullscreen does not work >>>> [QMS-382] QMapTool: Allow customized GDAL parameters >>>> [QMS-384] Add Garmin Fit power data to support powermeter pedals >>>> [QMS-389] Crash when loading/drawing POIs >>>> [QMS-391] Adapt Windows build scripts to PROJ.8/Quazip 1.x >>>> >>>> >>>> >>>> _______________________________________________ >>>> Qlandkartegt-users mailing list >>>> Qlandkartegt-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users >>> >>> >>> >>> >>> _______________________________________________ >>> Qlandkartegt-users mailing list >>> Qlandkartegt-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users >> >> >> >> >> _______________________________________________ >> Qlandkartegt-users mailing list >> Qlandkartegt-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users > > > _______________________________________________ > Qlandkartegt-users mailing list > Qlandkartegt-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
_______________________________________________ Qlandkartegt-users mailing list Qlandkartegt-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
