Hi Thorsten,
works with gdal-3.2.2!
I have to adjust ccmake with the paths for routino & proj etc as well.
Now I have a problem with quazip:
Could not find a package configuration file provided by "QuaZip-Qt5" with
any of the following names:
QuaZip-Qt5Config.cmake
quazip-qt5-config.cmake
ccmake quazip went wrong with
|Could NOT find Qt5Zlib (missing: Qt5Zlib_DIR) CMake Warning at
/usr/lib/x86_64-linux-gnu/cmake/Qt5/Qt5Config.cmake:39 (message): Failed
to find Qt5 component "Zlib" config file at
"/usr/lib/x86_64-linux-gnu/cmake/Qt5Zlib/Qt5ZlibConfig.cmake" Call Stack
(most recent call first): CMakeLists.txt:62 (find_package) I guess, that
there's no ||Qt5Zlib| in the Debian repo. Kind regards Piet ||
Am 28.05.21 um 09:11 schrieb Torsten Metzner:
Hi Piet,
Currently I cannot check this on a Debian Bullseye system. (Perhaps) I
will do it a little bit later.
You can check the output of the linker/compiler command for creating
libgdal.so.
Normally you should find something like:
-L/home/user/QMSDEVDIR/usr/lib -lproj
My build was made with proj-8.0.0 and gdal-3.2.2 perhaps something
changed with gdal-3.3.0?
Perhaps this is also a workaround for you, using gdal-3.2.2.
If I use ./configure --help with gdal-3.2.2 I see that -with-proj is
supported.
I will try to make a build with proj-8.0.1 and gdal-3.3.0 at the
weekend on my Ubuntu system to check if it works there.
If this is the case I will try to check it on a Debian Bullseye system
too.
I hope this helps a little bit,
Torsten
On 28.05.21 08:28, APM wrote:
Hi Thorsten,
thank you for your information.
I use Debian Bullseye. Unfortunately the introduction does not work
for me.
After compiling proj-8.0.1.tar.gz I get the
/home/user/QMSDEVDIR/usr/lib/ with
libproj.so.22.1.0 in it and two links libproj.so.22 and libproj.so to
libproj.so.22.1.0.
I configure gdal with
./configure --prefix=/home/user/QMSDEVDIR/usr --without-libtool
--with-proj=/home/user/QMSDEVDIR/usr --with-geotiff=internal
without errors.
Compiling gdal stops with a warning:
/usr/bin/ld: warning: libproj.so.22/usr/bin/ld, needed by
/home/user/src/gdal-3.3.0/libgdal.so, not found (try using -rpath or
-rpath-link)
and a couple of messages like "undefined reference to `proj_"
Maybe --with-proj=/home/user/QMSDEVDIR/usr is not recognized?
Kind regards
Piet
Am 26.05.21 um 23:29 schrieb Torsten Metzner:
Hi,
Here:
https://www.naviboard.de/thread/65969-gel%C3%B6st-qms-l%C3%A4sst-sich-nicht-mehr-kompilieren/?postID=530449#post530449
<https://www.naviboard.de/thread/65969-gel%C3%B6st-qms-l%C3%A4sst-sich-nicht-mehr-kompilieren/?postID=530449#post530449>
I gave an introduction how to build it under Ubuntu 20.04.2 LTS and
avoiding any conflict with system libraries.
It is in German but I hope one can understand it.
Torsten
On 26.05.21 17:56, HerbertFisel wrote:
Hi,
trying to translate V1.16.0 results in the ccmake error:
>>> By not providing "FindPROJ.cmake" in CMAKE_MODULE_PATH this
project has
>>> asked CMake to find a package configuration file provided by
"PROJ", but
>>> CMake did not find one.
>>>
>>> Could not find a package configuration file provided by
"PROJ" with any of
>>> the following names:
>>>
>>> PROJConfig.cmake
>>> proj-config.cmake
>>>
>>> Add the installation prefix of "PROJ" to CMAKE_PREFIX_PATH
or set
>>> "PROJ_DIR" to a directory containing one of the above
files. If "PROJ"
>>> provides a separate development package or SDK, be sure it
has been
>>> installed.
I assume this is because QmapShack has switched to Proj 8 and my
system
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.2 LTS"
has installed
>dpkg-query -W proj-bin
proj-bin 7.0.0-1~bionic0.
So I translated and installed proj-8.0.1 from source (proj.org) and
installed it on the default destination path
/usr/local/ with all its subdirectories bin, include, lib, etc.
My question: How can I cause ccmake to use the manual installed
proj version from that destination instead the system
installed version 7 ?
Or does that not work at all ?
Can anyone give me a hint.
Thanks in advance
Herbert
Am 24.05.21 um 11:42 schrieb Oliver Eichler:
Hi,
release time with a minor version upgrade. This is because of a
new feature: POI collections. Thanks to Henri for the work. Also
thanks to Wolfgang documenting the topic in the wiki.
https://github.com/Maproom/qmapshack/wiki/DocGisItemsPOI
Another big step is switching to Proj 8. On older distributions
this will give you some headaches. Maybe a good moment to upgrade.
As usual there has been a lot of bug fixig, too. I hope we cought
more bugs than introducing others with the new features.
For all the details see the change log and the attached tickets.
Enjoy the release!
Oliver
[QMS-220] "Select items from map" misses items
[QMS-275] Routino: Add Spanish and Czech as selectable languages
for turn instructions
[QMS-279] Track metrics not updated when using UNDO / REDO in Edit
mode
[QMS-282] Tags icons/rating disappear from workspace after saving
and closing a project
[QMS-285] WMTS-based maps aren't restored correctly
[QMS-297] Add GUI framework for POI databases
[QMS-299] CEnergyCycling is storing it's configuration in the
`General` section instead of it's own.
[QMS-301] Load POI file
[QMS-303] Add POI icons
[QMS-307] Optimization of POI query
[QMS-311] Automatically save projects to device
[QMS-313] UX improvements for POIs
[QMS-314] Fix/Add POI categories
[QMS-315] Make POI Icons User-Selectable
[QMS-317] Enable user to add POI to project via right-click
[QMS-318] Change poi_t to use radians
[QMS-321] Improve name selection for POI
[QMS-322] Make POIs show up in 'Select Items On Map'
[QMS-337] Upgrade to Proj 8 API
[QMS-343] .fit files from Suunto app have many trackpoints with
elevation = 0
[QMS-344] Better integration of new PROJ lib into cmake build system
[QMS-349] Upgrade to Quazip Qt5 V1.x
[QMS-353] "Select Items on Map" does not update when items are
removed
[QMS-354] Refactor the code to get rid of clazy warnings
[QMS-360] Fix compile flags for Windows 64bit
[QMS-362] Fit files containing more than one developer data ID
cannot be opened. e.g. from a Garmin FR 935 and a connected Stryd
footpod
[QMS-363] GIS items missing in projects loaded from file or database
[QMS-371] Crash while loading geocache from TwoNav device
[QMS-373] Refine templates to hide comments
[QMS-375] On-screen profile window has no close button
[QMS-378] Add option to link map views
[QMS-380] Toggle fullscreen does not work
[QMS-382] QMapTool: Allow customized GDAL parameters
[QMS-384] Add Garmin Fit power data to support powermeter pedals
[QMS-389] Crash when loading/drawing POIs
[QMS-391] Adapt Windows build scripts to PROJ.8/Quazip 1.x
_______________________________________________
Qlandkartegt-users mailing list
Qlandkartegt-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
_______________________________________________
Qlandkartegt-users mailing list
Qlandkartegt-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
_______________________________________________
Qlandkartegt-users mailing list
Qlandkartegt-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
_______________________________________________
Qlandkartegt-users mailing list
Qlandkartegt-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
_______________________________________________
Qlandkartegt-users mailing list
Qlandkartegt-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
_______________________________________________
Qlandkartegt-users mailing list
Qlandkartegt-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
