Running in compatibility mode doesn't work for everyone. It certainly doesn't work on my PC running Windows 7 Ultimate 64 bit. It tries to load (it gets a little further than if you just try running it normally - the splash screen that shows which files are being loaded), but then it locks up (at the point it's trying to load Source Model DLLs) and has to be killed in Task Manager. Replacing the DLL is the only method I have found that works on every machine I have tried.
Regards, -Richard Kelly Stanthorpe SHS Virtual Schooling Service Information Processing and Technology ------------------------------------ Mr Richard Kelly, BA BEd CertIV.A&WT Curriculum Coordinator IPT VSS SSHS Virtual Schooling IPT iSchool Teacher Toowoomba District IPT Panel Member NetPAG Committee Member Stanthorpe State High School 2 McGlew St Stanthorpe, 4380 Phone: 07 4681 5824 Fax: 07 4681 5800 Email: [email protected] Web: http://www.stanthorshs.eq.edu.au/vss.htm ------------------------------------ This message (including attachments) is intended for the addressee named above. It may also be confidential, privileged and/or subject to copyright. If you wish to forward this message to others, you must first obtain the permission of the author. If you are not the addressee named above, you must not disseminate, copy, communicate or otherwise use or take any action in reliance on this message. You understand that any privilege or confidentiality attached to this message is not waived, lost or destroyed because you have received this message in error. If you have received this message in error please notify the sender and delete from any computer. Unless explicitly attributed, the opinions expressed in this message do not necessarily represent the official position or opinions of the State of Queensland or the Department of Education and the Arts. Whilst all care has been taken, the Department of Education and the Arts disclaims all liability for loss or damage to person or property arising from this message being infected by computer virus or other contamination. ------------------------------------ -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Col Thompson Sent: Thursday, 29 July 2010 1:56 PM To: QSITE ICT Teachers Subject: RE: [qsiteict] Fix for VisioModeler in Windows 7 and Vista You don't have to download anything ... just run in Windows ME compatible mode (on the exe) - works fine ... Regards Col Thompson Director of Information Services ------------------------------------------ Whitsunday Anglican School Mackay, QLD REALITY.SYS corrupted: Reboot universe? (Y/N/Q) -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Richard Kelly Sent: Thursday, 29 July 2010 10:52 AM To: QSITE ICT Teachers Subject: [qsiteict] Fix for VisioModeler in Windows 7 and Vista VisioModeler does not work in Windows 7 and Vista, however there is a fix. 1. Download and install VisioModeler from: http://download.microsoft.com/download/visio2000enterprise/ORMtool/3.1/WIN98 /EN-US/MSVM31.EXE 2. Download this DLL: ftp://ftp.mackichan.com/download/sh33w32.dll 3. Go to the VisioModeler program directory (like C:\Program Files (x86)\Microsoft VisioModeler 3.1\Program or C:\Program Files\Microsoft VisioModeler 3.1\Program) and overwrite SH33W32.DLL with the file you downloaded in step 2. 4. Run VisioModeler. Mine worked fine at this point, but if it fails to run, proceed to step 5, otherwise, finish here. 5. Download and run shfix.exe from: http://seer.entsupport.symantec.com/docs/229251.htm 6. Extract shw32.dll from the executable. 7. Rename the DLL to sh33w32.dll 8. Go to the VisioModeler program directory (like C:\Program Files (x86)\Microsoft VisioModeler 3.1\Program or C:\Program Files\Microsoft VisioModeler 3.1\Program) and overwrite SH33W32.DLL with the file you extracted in step 6 and renamed in step 7. 9. Run VisioModeler. Credit for these instructions goes to Luke Vear, a student in grade 12 Virtual Schooling IPT (who actually made an EXE to do the patching for you - you can download it from http://www.acromos.com/vssipt/VisioModelerFix.zip if you wish, but it's not required). The first 4 steps got VisioModeler working on my PC at home running Windows 7 Ultimate 64 bit. Regards, -Richard Kelly Stanthorpe SHS Virtual Schooling Service Information Processing and Technology ------------------------------------ Mr Richard Kelly, BA BEd CertIV.A&WT Curriculum Coordinator IPT VSS SSHS Virtual Schooling IPT iSchool Teacher Toowoomba District IPT Panel Member NetPAG Committee Member Stanthorpe State High School 2 McGlew St Stanthorpe, 4380 Phone: 07 4681 5824 Fax: 07 4681 5800 Email: [email protected] Web: http://www.stanthorshs.eq.edu.au/vss.htm ------------------------------------ This message (including attachments) is intended for the addressee named above. It may also be confidential, privileged and/or subject to copyright. If you wish to forward this message to others, you must first obtain the permission of the author. If you are not the addressee named above, you must not disseminate, copy, communicate or otherwise use or take any action in reliance on this message. You understand that any privilege or confidentiality attached to this message is not waived, lost or destroyed because you have received this message in error. If you have received this message in error please notify the sender and delete from any computer. Unless explicitly attributed, the opinions expressed in this message do not necessarily represent the official position or opinions of the State of Queensland or the Department of Education and the Arts. Whilst all care has been taken, the Department of Education and the Arts disclaims all liability for loss or damage to person or property arising from this message being infected by computer virus or other contamination. ------------------------------------ --- You are currently subscribed to qsiteict as: [email protected]. To unsubscribe click here: http://lyris.edna.edu.au/u?id=705591.c5601b37e890d4119c8bd0c6a1e35c81&n=T&l= qsiteict&o=1722781 or send a blank email to leave-1722781-705591.c5601b37e890d4119c8bd0c6a1e35...@edna.edu.au This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Whitsunday Anglican School. Finally, while an updated anti-virus product scans all outgoing mail, the recipient should check this email and any attachments for the presence of viruses. Whitsunday Anglican School accepts no liability for any damage caused by any virus transmitted by this email. --- You are currently subscribed to qsiteict as: [email protected]. To unsubscribe click here: http://lyris.edna.edu.au/u?id=705952.3a7792cddee8d2e2344622b46859707c&n=T&l= qsiteict&o=1722974 or send a blank email to leave-1722974-705952.3a7792cddee8d2e2344622b468597...@edna.edu.au --- You are currently subscribed to qsiteict as: [email protected]. To unsubscribe click here: http://lyris.edna.edu.au/u?id=705742.d42ea647e85be3beb25392eea1a77f09&n=T&l=qsiteict&o=1723159 or send a blank email to leave-1723159-705742.d42ea647e85be3beb25392eea1a77...@edna.edu.au
