Hei
Did You read the latter post? There are some problems more, with maemo also.
The 5800 with BT - feed worked whole last night
without problems. I am inside and feeding some
old trip with BT to phone (with satellite inf and proper fix).
--------------------------------------------------------------------------------------------------------
Hei
Have to reply myself.
I abandoned the Mobility/Location and used native
code in Symbian. It works and gives direction just like asked.
It seems that I must do the same with maemo, no direction.
Another problem: If application gets too many
updates (50 times / sec) from many places it
seems like having tendency to loose them. This
happens on all platforms but Win32 (mac,
wince,maemo, symbian). Network downloads suffer
from this also mobility/location/positionupdated.
All emits do not work, they are lost??.
--------------------------------------------------------------------
Hannu
PS The Tasku Loisto II product is done with
Qt. http://www.hannusales.fi/ulpub/TaskuLoisto2010.pdf
still missing Symbian Maemo.
At 06:16 26.8.2010, [email protected] wrote:
Content-Language: en-US
Content-Type: multipart/alternative;
boundary="_000_E0A713204105F445A60FE8B991996580338098EBC6NOKEUMSG02mgd_"
Forwarding my reply to the list
From: Laing David (Nokia-MS/Brisbane)
Sent: Thursday, 26 August 2010 11:04 AM
To: 'ext Hannu Säles'
Subject: RE: [Qt-mobility-feedback] location and direction bug ??
Sorry about the delay in the response.
There are a couple of reasons that the direction
attribute may not be being set. The most common
reason would occur when both satellite and
network based position data is coming in the
network data will appear long before the
satellite data and wont have a direction
associated with it. The other reason could be
that you didnt have a good satellite fix
there are several attributes which are either
not set or are pretty inaccurate before 3 or
more satellites are contributing to the fix
(depending on conditions this can take some time).
If the direction is not being reported when you
have the phone set to only use GPS / AGPS,
youre testing it out of doors and away from
buildings, and youre waiting at least 5-10
minutes for the first fix then please file a bug and well look into it.
Cheers,
Dave
From: [email protected]
[mailto:[email protected]]
On Behalf Of ext Hannu Säles
Sent: Sunday, 22 August 2010 8:39 PM
To: [email protected]
Subject: [Qt-mobility-feedback] location and direction bug ??
Hei
Mobility location does not give direction in symbian :
In the code:
if (info.hasAttribute(QGeoPositionInfo::Direction) ){
g_ULdata->NMEAData->COG.v=info.attribute(QGeoPositionInfo::Direction);
}
Course over ground (COG) is never set.
Position and SOG are OK.
This works in native Symbian class
( void CTLSatInfo::PositionInfoUpdatedL( TPositionInfoBase & aPosInfo,
const TDesC & aModulename) )
Bug ?? I tried to find the reason at
CQGeoPositionInfoSourceS60::TPositionInfo2QGeoPositionInfo
but not succedded.
I am using QT SDk and mobility 1.0.2 .
Hannu
Hannu Säles Oy
Ruomelantie 12 C, FI-02210 Espoo, Finland
<http://www.hannusales.fi/>http://www.hannusales.fi
tel: +358-400-725374
_______________________________________________
Qt-mobility-feedback mailing list
[email protected]
http://lists.trolltech.com/mailman/listinfo/qt-mobility-feedback
Hannu Säles Oy
Ruomelantie 12 C, FI-02210 Espoo, Finland
http://www.hannusales.fi
tel: +358-400-725374
_______________________________________________
Qt-mobility-feedback mailing list
[email protected]
http://lists.trolltech.com/mailman/listinfo/qt-mobility-feedback
