Hi Houcheng, On Wed, Nov 05, 2014 at 05:21:33PM -0800, Houcheng Lin wrote: > Hi Tycho, > Thanks your information; I didn't know that the 12.10 is already EOL'd. > Since I had write some code that is been tested on 12.04, I prefer to not > moving > my desktop to newer version until my current project is finished. > BTW, i am not native English, what's your meaning of "if that's not a > typo"?
Sorry, I meant if you hadn't mistyped 14.10 (or some other version) as 12.10. Tycho > Thanks, > Houcheng Lin > > Tycho Andersen於 2014年11月5日星期三UTC+8下午7時40分04秒寫道： > > > > Hi Houcheng, > > > > On Tue, Nov 04, 2014 at 09:48:56PM -0800, Houcheng Lin wrote: > > > Hi all, > > > > > > My systray didn't work in Ubuntu 12.10. I had tried every different > > > configuration for systray but > > > > Support for 12.10 was EOL'd in May 2014; if that's not a typo, you can > > upgrade to 14.04 and use the stock xpyb packages from the distro, as > > the versions are new enough. > > > > Tycho > > > > > it just didn't show and no any error message on my system. I guess that > > I > > > had upgrade some of > > > the qtile depdent library that cause the problem. > > > So, i decided to upgrade all the library used by qtile and hope can fix > > the > > > problem. > > > After building several library and reboot, the qtile's systray shows two > > > lovely icons: DROPBOX > > > status and SKYPE notification. > > > > > > Below is a rough summary of steps to rebuild whole library, and BTW the > > ARM > > > platfrom can also > > > use these steps to build ARM version libraries. > > > > > > thanks, > > > Houcheng Lin > > > > > > > > > # install qtile to prevent missing > > > sudo apt-add-repository ppa:tycho-s/ppa > > > sudo apt-get update > > > sudo apt-get install qtile > > > > > > > > > mkdir qtile > > > cd qtile > > > > > > > > > # arm version qtile install #### > > > apt-get install autoconf libtool git > > > apt-get install python-dev libpng-dev python-gtk2 > > > > > > wget http://xcb.freedesktop.org/dist/xcb-proto-1.11.tar.gz > > > tar xzvf xcb-proto-1.10.tar.gz > > > cd xcb-proto-1.10.tar.gz > > > ./autogen.sh && ./configure && make install > > > cd .. > > > > > > > > > wget http://xcb.freedesktop.org/dist/xpyb-1.3.1.tar.gz > > > tar xzvf xpyb-1.3.1.tar.gz > > > cd xpyb-1.3.1 > > > libtoolize --force > > > aclocal > > > autoheader > > > automake --force-missing --add-missing > > > autoconf > > > ./configure > > > make install > > > cd .. > > > > > > > > > git clone [email protected]:tych0/xpyb-ng.git > > > cd xpyb-ng > > > python setup.py install > > > cd .. > > > > > > > > > # libxcb > > > wget http://xcb.freedesktop.org/dist/libxcb-1.11.tar.gz > > > tar xzvf libxcb-1.11.tar.gz > > > cd libxcb-1.11 > > > ./configure > > > make install > > > cd .. > > > > > > # pixman > > > git clone git://anongit.freedesktop.org/git/pixman.git > > > cd pixman > > > ./autogen.sh && make install -j3 > > > cd .. > > > > > > #cairo > > > wget http://cairographics.org/releases/cairo-1.10.0.tar.gz > > > tar xvzf cairo-1.10.0.tar.gz > > > cd cairo-1.10.0 > > > ./autogen.sh --enable-xcb > > > make > > > sudo make install > > > cd .. > > > > > > > > > git clone git://git.cairographics.org/git/py2cairo > > > cd py2cairo > > > ./autogen.sh --enable-xcb && make install > > > cd .. > > > > > > apt-get install python-gtk2 > > > > > > git clone git://github.com/qtile/qtile.git > > > cd qtile > > > sudo python setup.py install > > > > > > > > > -- > > > You received this message because you are subscribed to the Google > > Groups "qtile-dev" group. > > > To unsubscribe from this group and stop receiving emails from it, send > > an email to [email protected] <javascript:>. > > > For more options, visit https://groups.google.com/d/optout. > > > > -- > You received this message because you are subscribed to the Google Groups > "qtile-dev" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "qtile-dev" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
