Re: [QUAD-L] Fw: Jeffrey Gaede shared "Mouthpiece.jpg" with you

Sun, 25 Feb 2018 12:57:06 -0800 

Can you use an IV tube?
If you taped a pipe cleaner thing to it, or unbent paper-clip, covered in tape. You could bend it to any shape. 
Greg

On 2/25/2018 12:25 PM, Jeffrey Gaede wrote:
Hello, Folks. I was wondering if you might help searched for something. I have a sip and puff controlled wheelchair and back around 2005 I had the perfect mouthpieces for this chair. A few years ago I got down to the last mouthpiece and went online to order more, only I couldn't find the same thing. I've searched a number of times the past couple years and can't come up with anything close. It's possible that these were never designed to be sip and puff wheelchair mouthpieces, but I'd be more than grateful if someone could locate them for me. They are "L-shaped", made of a very sturdy plastic composite, giving them a little flex but you couldn't clamp it closed with the tightest bite, and there is a "doughnut" molded into one end. The attached picture is of the last one I had. It's a little warped because someone tried to wash it in a dishwasher, but it would normally be about 5" long, again, L-shaped, and has a doughnut molded onto one end. Thanks for any help… Jeff
On Sun, Feb 25, 2018 at 11:12 AM, Jeffrey Gaede <[email protected] <mailto:[email protected]>> wrote: 

    Mouthpiece.jpg
    <https://www.dropbox.com/s/7a96xodsh3v242h/Mouthpiece.jpg?dl=0>
    Does this work?


        

        


        Mouthpiece.jpg

    Shared with Dropbox
        

    <https://www.dropbox.com/s/7a96xodsh3v242h/Mouthpiece.jpg?dl=0>



    ------------------------------------------------------------------------
    *From:* Jim Lubin <[email protected] <mailto:[email protected]>>
    *To:* Jeffrey Gaede <[email protected] <mailto:[email protected]>>
    *Sent:* Sunday, February 25, 2018 11:07 AM
    *Subject:* Re: Jeffrey Gaede shared "Mouthpiece.jpg" with you

    the best way to do it is to:

     1. select the file
     2. click Share
     3. click Create link
     4. click Copy link

    it will then make a shorter url that you can paste in your message
    to share.

    On Sun, Feb 25, 2018 at 10:32 AM, Jeffrey Gaede (via Dropbox)
    <[email protected] <mailto:[email protected]>> wrote:




                Hi there,

        Jeffrey Gaede ([email protected] <mailto:[email protected]>)
        invited you to view the file "*Mouthpiece.jpg*" on Dropbox.

        Jeffrey said:
        /"Remember, this has a hole running through the middle, it's
        old because it was my last one, warped a bit, but it was
        L-shaped and what kind of looks like the flared end was
        originally a doughnut-shaped part of the plastic that was
        molded in place. This thing is about 5-6" long overall and
        about the diameter of one of those long, skinny plastic
        straws. I can get a link to those types of straws if that's
        confusing."/

        View file
        <https://www.dropbox.com/l/scl/AAA_8iVcAaak08DTdRTjpHkiXKy94pB5x94>

        Enjoy!
        The Dropbox team

        /Jeffrey and others will be able to see when you view this
        file. Other files shared with you through Dropbox may also
        show this info. Learn more
        <https://www.dropbox.com/l/AADpjNb28W-WAhovc157AzenAq50IUIyWgM>
        in our help center. /
                



                © 2018 Dropbox

Reply via email to