Re: [QUAD-L] Fw: Jeffrey Gaede shared "Mouthpiece.jpg" with you

Sun, 25 Feb 2018 13:30:28 -0800 

The plastic is way too hard for something like that. It has a little 
flexibility but it's pretty hard.

      From: Greg <[email protected]>
 To: [email protected] 
 Sent: Sunday, February 25, 2018 12:56 PM
 Subject: Re: [QUAD-L] Fw: Jeffrey Gaede shared "Mouthpiece.jpg" with you
   
 Can you use an IV tube?
 If you taped a pipe cleaner thing to it, or unbent paper-clip, covered in 
tape. You could bend it to any shape.
 Greg
 
 On 2/25/2018 12:25 PM, Jeffrey Gaede wrote:
  
 
 
  Hello, Folks. I was wondering if you might help searched for something. I 
have a sip and puff controlled wheelchair and back around 2005 I had the 
perfect mouthpieces for this chair. A few years ago I got down to the last 
mouthpiece and went online to order more, only I couldn't find the same thing.  
I've searched a number of times the past couple years and can't come up with 
anything close. It's possible that these were never designed to be sip and puff 
wheelchair mouthpieces, but I'd be more than grateful if someone could locate 
them for me. They are "L-shaped", made of a very sturdy plastic composite, 
giving them a little flex but you couldn't clamp it closed with the tightest 
bite, and there is a "doughnut" molded into one end. The attached picture is of 
the last one I had. It's a little warped because someone tried to wash it in a 
dishwasher, but it would normally be about 5" long, again, L-shaped, and has a 
doughnut molded onto one end. Thanks for any help… Jeff
  
  
 
        
 On Sun, Feb 25, 2018 at 11:12 AM, Jeffrey Gaede <[email protected]> wrote:
 
   Mouthpiece.jpg Does this work? 
    
|  
|  
|  
|  
  |  
  |

  |

  |
|  
|    |  
Mouthpiece.jpg
 Shared with Dropbox  |  
  |

  |

  |

  
   
 
             From: Jim Lubin <[email protected]>
 To: Jeffrey Gaede <[email protected]> 
 Sent: Sunday, February 25, 2018 11:07 AM
 Subject: Re: Jeffrey Gaede shared "Mouthpiece.jpg" with you
     
   the best way to do it is to:     
   - select the file
   - click Share
   - click Create link
   - click Copy link
 it will then make a shorter url that you can paste in your message to share.   
 On Sun, Feb 25, 2018 at 10:32 AM, Jeffrey Gaede  (via Dropbox) 
<[email protected]> wrote:
 
  
|  
| 
  |
|  |
|  
| 
  |
| 
  | Hi there,
 
 Jeffrey Gaede ([email protected]) invited you to view the file  
"Mouthpiece.jpg" on Dropbox.
 
 Jeffrey said:
 "Remember, this has a hole running  through the middle, it's old because it 
was my last one, warped a  bit, but it was L-shaped and what kind of looks like 
the flared end  was originally a doughnut-shaped  part of the plastic that  was 
molded in place. This thing is about  5-6" long overall and  about the diameter 
of one of those  long, skinny plastic straws. I can get a link to those types 
of  straws if that's confusing."
 
 View file 
 Enjoy!
 The Dropbox team   
 Jeffrey and others will be able to see  when you view this file. Other files 
shared with you through  Dropbox may also show this info. Learn more in our 
help center.    | 
  |
| 
  |

  |

 
| 
  |
|  
| 
  | © 2018 Dropbox |

  |

  |

Reply via email to