I have a 9gb full height 5.25 scsi HD that I am trying to install in my Quadra 610
I have set the jumpers to what I think should work and hooked it up (ok so it doesn't fit in the case with the lid on but I can solve that later) and when I hit the power button, the computers power light comes on and the boot drive starts to spin up and all of the sudden (less than a second) the power cuts im thinking this could be too little power for the drive? it takes 25watts and I think the supply is only 83, I tried unplugging the other drive and just seeing if the big one would spin up but had the same power cut out I also thought it could be a problem with the power cable (I tried the one that was there in case I wanted a cdrom drive) but I tried the cable from the other drive and neither worked the drive is a SEAGATE ST410800N 9GB 50 PIN SCSI and came in a hotswap mount so I had to make due with the jumpers I had, but it should still work (I had to move the termination power jumper but the drive isn't terminated so I don't think it matters) please help me here Otto Hansen -- Quadlist is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Quadlist info: <http://lowendmac.com/lists/quadlist.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/quadlist%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
