Byron Gardner - on 6/3/03, Quadra 630 HD Help - expostulated:
> I can't get my hard drives to be recognized by my 630. Never had this > problem before now. Tried a 250 MB Conner IDE and a 4 GB WD IDE. The 250 >MB > was the original. I have move the jumpers all around-master, slave, select > and no jumper at all. > > I have tried using OS 8.1 and 7.6 CD ROMs. The 630 boots Okay from them. I > was able to get the 4 GB to mount but after installing a fresh OS on the > drive--it would not boot from the HD-only a flashing ? Disk until I put >in a > CD. And I chose the HD using Startup Disk. > > This is a good Mac and I can't understand what the problem is. Both HDs >are > good. > > All help needed and welcome. Sometimes I have to try several to get one that will mount my new (used) HDs. Have you tried Apple HD SC Setup 7.3.5 patched? It tends to see lots of things. Also Mt. Everything, Lido and even Silverlining Pro. -- HTH, Paul (<pjspop @ gwe.net>) <>< QuadList & PCI PowerMacs nanny ^�^ -- Quadlist is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Quadlist info: <http://lowendmac.com/lists/quadlist.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/quadlist%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
