Hi all, I am still trying to get my 1.6 efi engined 2+2 running. So far I have replaced the fuel tank, pump, filter and pipes, the coil pack, ht leads and plugs, the ecu, idle control valve, and map sensor, checked the wiring and vacuum pipes, and taken the head off checked the valves and followers but although it now starts easily the tickover is "unhappy" and on a test drive I got extreme surging when I tried to change to second and pull up a hill. The latest suspect is the throttle position pot. I have 5v going in but when I removed and tested the pot it seems to be completely open cicuit between all pins at all throttle positions. When I disconected the pot with the engine running I could not detect any changes. I just missed a pot on ebay and I was quoted an unbelievable £110 at the main dealer. So has ayone any thoughts on this or even better anyone have a spare throttle position sensor they could sell me. Thanks Stewart
--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
