The superchip comes in 2 versions, one is 165bhp and uses the standard injectors, the other is 195bhp and uses grey injectors (normally used on a cossy i think). It's a piggyback module for the standard Ford ecu, just plugs into the connector on the end.
In theory it doesn't need a rolling road session any more than s factory ecu would. I fitted the 195bhp superchip to the RS turbo 2+2 i converted for Steve. Jim Matthew Wastell wrote: > How do you tell the chip what injectors you are using out of interest? > Is it done at a rolling road session after fitting or something? > > Think mine are 370cc for about 250 bhp. However i'm using megasquirt > on 16v so i don't know how it compares with chipped ford settings. > > Matthew > > > > On 13 Jul 2009, at 15:46, Arn1905 <[email protected]> wrote: > > >> Picked up a set of New Grey ford 258CC rally injectors for RS Turbo. >> Should be alright, one up from the beige according to the guy. >> >> £60 thanks to the Ebay offer system, not too shabby. >> >> >> On Jul 11, 4:52 pm, Arn1905 <[email protected]> wrote: >> >>> Im aware of that, im currently waiting for a set from poland to >>> finish, or ill just make an offer on some ultra sonicly cleaned ones. >>> >>> Theres also a decent rolling road and tuning company near me that >>> sorts out several scoobys, atoms and bike engined minis, ill have to >>> give them a call. >>> >>> Thank you, theres one finishing soon on fleabay currently at £24 and >>> £15 postage, might just buy a brand new one for £39 delivered. >>> >>> On Jul 11, 4:24 pm, "Andy Haworth" <[email protected]> wrote: >>> >>> >>>> Just be aware that a 195 chip will need beige injectors, some mods >>>> to the >>>> fuelling and a proper setup before you turn up the boost. The >>>> standard blue >>>> injectors aren’t up to the job on anything higher than the 165 c >>>> hip. >>>> >>>> I think the XR strut brace would fit, the front one is completely >>>> the wrong >>>> shape for the frame though >>>> >>>> Andy >>>> >>>> -----Original Message----- >>>> From: [email protected] >>>> [mailto:[email protected]] >>>> >>>> On Behalf Of Arn1905 >>>> Sent: 11 July 2009 16:21 >>>> To: Quantum Owners Group >>>> Subject: [Quantum Owners] Bits and bobs >>>> >>>> Im picking up a few mod bits for the frst conversion, got my hands >>>> on >>>> an ofab 195 superchip for £60 delivered, looking at a new suspen >>>> sion >>>> and disks/pads at the moment. >>>> >>>> Im thinking of some strut braces, ive seen another topic on here >>>> about >>>> them and it stated that the front one would not fit, i was just >>>> wondering if a rear xr2 strut brace would fit? >>>> >>>> Thanks >>>> Arnie >>>> > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
