Thanks Jim,
   Your input is always greatly received. I am going for the simpler the 
better as this usually means lower repair costs and less failures. I am 
attending a GRP course presented by John Dickens the Technical Editor of 
Complete Kitcar Magazine in South Shields, details at 
http://www.ecfibreglasssupplies.co.uk/store/ this is a free course 
beginning in early October, so if anybody wants to go let him know, 
therefore hopefully the GRP side will not be an issue.

   All I want is a car that I can use everyday, that is reliable and 
economical and does not rust. I am pretty good with anything mechanical, 
but electrics are my downfall, hence keeping things simple. When did 
electronics start to play a bigger part? Speed and 0-60 times are not 
that important, I have a motorbike and there are not many cars that will 
beat that in these stakes, however I do not like driving "normal" cars 
hence changing the Q.

Russell

Jim Hearne wrote:
> I believe part off the drivers side engine bay reinforcement needs 
> cutting away and a replacement created higher or lower than the original.
> The electrics are pretty much as you suggest if you get a early diesel, 
> they get increasingly more electronics (and power) the newer they are.
> But until you get to ecus with the PATS anti theft system they should be 
> fairly simple to wire in.
>
> The Diesel fuel tank may have a swirl pot in as diesel fuel pumps don't 
> like sucking up air.
>
> The turbo diesel would certainly be recommend, it normally doesn't have 
> an intercooler but is usually fitting in the Quantums with a rad and 
> intercooler from a Escort RST.
>
> Jim
>
>
> [email protected] wrote:
>   
>> I have decided, as my daily driver does not have long left to convert
>> the coupe to diesel. I have read other information on the group with
>> regards to doing this but was wondering if it is better to go turbo or
>> non turbo. I am going to go the Endura route as I believe the CVH box
>> will go straight on if the engine I get does not have the same box
>> originally.
>>
>> I read briefly about a slight modification being necessary in the
>> engine bay. Could somebody expand on this a little.
>>
>> As the car is currently XR2 based I am guessing that I will need a
>> live feed from the ignition along with relay for the glowplugs and a
>> similar feed for the fuel pump shut off.
>>
>> When I do this I also have an electric power steering column to go in
>> to make the car a bit easier to park, so hopefully I may even write a
>> magazine article.
>>
>> Any information gratefully received.
>>
>> Russell
>>     
>>   
>>     
>
>
> >
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.409 / Virus Database: 270.13.83/2353 - Release Date: 09/08/09 
> 06:48:00
>
>   



--~--~---------~--~----~------------~-------~--~----~
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
-~----------~----~----~----~------~----~------~--~---

Reply via email to