In my turbo  diesel 2+2 , the mk2 fiesta fuel tank does not have a
swirl pot, this was the diesel tank supplied to the orignal owner/
builder. The engine is a 1995 spec, again supplied by QSC it was "easy
to wire up as the wiring just plugged in" according to the original
owner, wiring was not his forte as I've found out over the years, but
the engine/glow plug wiring has been fine, I'm sure I have the wiring
diagram supplied by QSC, I'll look it out so I can scan it for you. My
2+2 has an mk 4 Escort RST radiator & intercooler. I agree with Jim
that a late MK3 Fiesta would be an ideal doner, thats what I would
look for if I was to convert my CVH enginrd Saloon ( which I decided
against), don't forget you will need a bigger battery ( or 2 on a
Saloon ?) a high output alternator especially if your fitting EPAS. It
may be worth contacting Andy Heaton as his Saloon is the sister car to
my 2+2.

John
On 9 Sep, 15:19, Jim Hearne <[email protected]> wrote:
> It must be able to flow enough, the outlet of the pipe is 8mm
> The question is has the injection pump got enough suction to pull the
> petrol out of the tank through the smaller pipe.
> The roller type pumps used don't suck very well.
>
> Jim
>
>
>
> Matthew Wastell wrote:
> > I wonder if the reduced pipes can flow enough petrol I assume probably  
> > yes for a standard zetec but I wonder for a turbo. Any ideas how to  
> > work that sort of thing out?
> > M
>
> > On 9 Sep 2009, at 13:33, Jim Hearne <[email protected]> wrote:
>
> >> Yes, they did.
> >> Because the outlet will be 6 or 8mm the diesel injection pump uses
> >> rather than the 12or 14mm outlet the petrol injection pump needs for
> >> it's gravity feed.
> >> It might still work but nobody has tried.
>
> >> Jim
>
> >> Matthew Wastell wrote:
>
> >>> Did they make a mk2 diesel? If so why aren't we fitting that for fuel
> >>> injection conversions?
>
> >>> Matthew
>
> >>> On 9 Sep 2009, at 13:16, Jim Hearne <[email protected]> wrote:
>
> >>>> I mentioned that in the other reply......
>
> >>>> Jim
>
> >>>> Matthew Wastell wrote:
>
> >>>>> Do diesels need some kind of swirl pot or change of fuel tank?
>
> >>>>> Matthew
>
> >>>>> On 9 Sep 2009, at 08:29, Jim Hearne <[email protected]
> >>>>> <mailto:[email protected]>> wrote:
>
> >>>>>> I'm not a diesel expert, i've just seen in the engine bay of a few
> >>>>>> Diesel Q's, owned a Diesel Mk3 Fiesta for a year or so and  
> >>>>>> changed a
> >>>>>> gearbox in a Mk5 Diesel Escort Van.
> >>>>>> The Fiesta and pretty sure the Escort were pretty much mechanical
> >>>>>> operation, neither had a ECU
> >>>>>> So the wiring is as you mentioned, an ignition feed and a battery
> >>>>>> feed plus a little wiring for the glow plug warning light.
> >>>>>> The engine wiring was a separate loom so wouldn't be hard to  
> >>>>>> connect
> >>>>>> into the Quantum loom.
> >>>>>> Even if you went for a later engine with a ecu the engine and ecu
> >>>>>> loom are likely to be separate from the main car loom and should
> >>>>>> just
> >>>>>> come down to the same few wires.
> >>>>>> I'm happy to advise on the electrics when the time comes.
>
> >>>>>> I would think a late Mk3 Fiesta would be the best bet, if you can
> >>>>>> get
> >>>>>> a complete accident damaged car then you get the stronger IB5
> >>>>>> gearbox  (which will still fit into your Quantum), the wiring loom
> >>>>>> and all the other bits  and bobs that come in handy that you might
> >>>>>> not get if you just bought an engine off ebay.
>
> >>>>>> You will have to cut n shut the exhaust downpipe to match up with
> >>>>>> the
> >>>>>> Saloon system and probably play round with the front rad hoses  
> >>>>>> (you
> >>>>>> can fit a Mk3 Fiesta rad in a saloon, mine has it with the Zetec.)
>
> >>>>>> Jim
>
> >>>>>> Russell Willcox wrote:
>
> >>>>>>> Thanks Jim,
> >>>>>>>  Your input is always greatly received. I am going for the
> >>>>>>> simpler the
> >>>>>>> better as this usually means lower repair costs and less
> >>>>>>> failures. I am
> >>>>>>> attending a GRP course presented by John Dickens the Technical
> >>>>>>> Editor of
> >>>>>>> Complete Kitcar Magazine in South Shields, details at
> >>>>>>>http://www.ecfibreglasssupplies.co.uk/store/this is a free  
> >>>>>>> course
> >>>>>>> beginning in early October, so if anybody wants to go let him  
> >>>>>>> know,
> >>>>>>> therefore hopefully the GRP side will not be an issue.
>
> >>>>>>>  All I want is a car that I can use everyday, that is reliable  
> >>>>>>> and
> >>>>>>> economical and does not rust. I am pretty good with anything
> >>>>>>> mechanical,
> >>>>>>> but electrics are my downfall, hence keeping things simple. When
> >>>>>>> did
> >>>>>>> electronics start to play a bigger part? Speed and 0-60 times are
> >>>>>>> not
> >>>>>>> that important, I have a motorbike and there are not many cars
> >>>>>>> that will
> >>>>>>> beat that in these stakes, however I do not like driving "normal"
> >>>>>>> cars
> >>>>>>> hence changing the Q.
>
> >>>>>>> Russell
>
> >>>>>>> Jim Hearne wrote:
>
> >>>>>>>> I believe part off the drivers side engine bay reinforcement  
> >>>>>>>> needs
> >>>>>>>> cutting away and a replacement created higher or lower than the
> >>>>>>>> original.
> >>>>>>>> The electrics are pretty much as you suggest if you get a early
> >>>>>>>> diesel,
> >>>>>>>> they get increasingly more electronics (and power) the newer
> >>>>>>>> they are.
> >>>>>>>> But until you get to ecus with the PATS anti theft system they
> >>>>>>>> should be
> >>>>>>>> fairly simple to wire in.
>
> >>>>>>>> The Diesel fuel tank may have a swirl pot in as diesel fuel
> >>>>>>>> pumps don't
> >>>>>>>> like sucking up air.
>
> >>>>>>>> The turbo diesel would certainly be recommend, it normally
> >>>>>>>> doesn't have
> >>>>>>>> an intercooler but is usually fitting in the Quantums with a rad
> >>>>>>>> and
> >>>>>>>> intercooler from a Escort RST.
>
> >>>>>>>> Jim
>
> >>>>>>>> [email protected] 
> >>>>>>>> <mailto:[email protected]
>
> >>>>>>>>> wrote:
>
> >>>>>>>>> I have decided, as my daily driver does not have long left to
> >>>>>>>>> convert
> >>>>>>>>> the coupe to diesel. I have read other information on the group
> >>>>>>>>> with
> >>>>>>>>> regards to doing this but was wondering if it is better to go
> >>>>>>>>> turbo or
> >>>>>>>>> non turbo. I am going to go the Endura route as I believe the
> >>>>>>>>> CVH box
> >>>>>>>>> will go straight on if the engine I get does not have the same
> >>>>>>>>> box
> >>>>>>>>> originally.
>
> >>>>>>>>> I read briefly about a slight modification being necessary in  
> >>>>>>>>> the
> >>>>>>>>> engine bay. Could somebody expand on this a little.
>
> >>>>>>>>> As the car is currently XR2 based I am guessing that I will
> >>>>>>>>> need a
> >>>>>>>>> live feed from the ignition along with relay for the glowplugs
> >>>>>>>>> and a
> >>>>>>>>> similar feed for the fuel pump shut off.
>
> >>>>>>>>> When I do this I also have an electric power steering column to
> >>>>>>>>> go in
> >>>>>>>>> to make the car a bit easier to park, so hopefully I may even
> >>>>>>>>> write a
> >>>>>>>>> magazine article.
>
> >>>>>>>>> Any information gratefully received.
>
> >>>>>>>>> Russell
>
> >>>>>>>> ---
> >>>>>>>> ---
> >>>>>>>> ---
> >>>>>>>> ---------------------------------------------------------------
>
> >>>>>>>> No virus found in this incoming message.
> >>>>>>>> Checked by AVG -www.avg.com<http://www.avg.com>
> >>>>>>>> Version: 8.5.409 / Virus Database: 270.13.83/2353 - Release
> >>>>>>>> Date: 09/08/09 06:48:00- Hide quoted text -
>
> - Show quoted text -
--~--~---------~--~----~------------~-------~--~----~
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
-~----------~----~----~----~------~----~------~--~---

Reply via email to