Re: [Quantum Owners] Re: H4 Not Starting

Tue, 01 Dec 2009 04:53:08 -0800

Yes, the ecu won't do anything without the crank sensor pulses.
The cam sensor is only used for sequential (rather than batch) injection at low engine speeds.
You can unplug the cam sensor with no obvious effect on the engine (in my experience).

Jim


Pete M wrote: 
On 30 Nov, 16:21, Critter <[email protected]> wrote:
  
Hi Hamish,

a..The crankshaft sensor I haven't checked yet as I assumed (wrongly)
that this produced the spark and the camshaft sensor triggered the
injectors. So I will check this.
    

If the crankshaft sensor's not working then I didn't think you get any
fuel or spark.  It's a common problem people get when fitting the 2.0
from an auto Mondeo,  forgetting to swap the sensor for a manual one
and then finding the engine won't start.

--
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en
 
IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).

Reply via email to