I could not find any that were made to match the sierra spindle. I end up getting the universal bayonet wiper arms from Europa spares along with the spindle adaptor. I then cut down the adaptor and using an old spindle hammered the spline pattern into it. This modified adaptor could then be bolted to the spindles on the scuttle and the arms screwed to the spindle. Quite a bit of work, but they are nice and shiny and also are length adjustable so you can set them up to give a good sweep (just make sure you set it up with the hood header rail on - I didn't and one of the arms came flying off the first time I used them with the roof on)
James. ======================================== Message Received: Jan 24 2010, 05:54 PM From: "Ian H (S3-023)" To: "Quantum Owners Group" Cc: Subject: [Quantum Owners] Re: Xtreme Window Wipers Car Builder Solutions have do some, but I do not know if they fit the sierra drive spindles. They look like the old BMC clip on type. Ian On 24 Jan, 00:07, Tom wrote: > hi, i'm building an Xtreme at the moment and i'm sure i've seen other > Xtremes around with chrome or stainless steel wipers on instead of the > sierra ones and was just wondering if anyone knew where to get them > from? thanks. Tom. -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
