Thanks Jim I'll attack the inner door panel & have a look see which one I've got & try to sort it
Andy C On 27 Apr, 08:52, Jim Hearne <[email protected]> wrote: > Mk3 Fiesta, but there are 2 designs used on that (U shaped channel and S > shaped channel) but the instructions for modifying it only relate to one > design (U shaped). > > There are also 2 methods of modifying them to fit on the 2+2, the early > version of which leaves the cable rubbing on the steel channel which is > probably why yours has broken. > The later version involves shortening the channel and putting a machined > steel (should be stainless !) spacer in the outer cable to take up the > resulting slack. > I think the details are on the club site. > > Mk4/5 Fiesta are different again. > > When find the right Mk3 Fiesta ones look carefully at the black plastic > where the cable is clipped into the "slider" section, this often cracks > and breaks away. > This could be the other reason yours has failed. > > Jim > > > > Andy Cowley (Q2-379) wrote: > > My 2+2 is fitted with electric windows & today the driver's door one > > refused to come back up, so now I have a piece of MDF temporarily > > filing the gap between the door & the roof (much to the amusement of > > her indoors). > > > I've checked the switch & the wiring & they're OK so it looks like I'm > > on the hunt for a replacement. Shouldn't be surprised really as I've > > had to use "manual assistance" (a little push/pull) to raise it for a > > while now. > > > Are the motors/runners usually the one's found on a MK3 Fiesta or > > could I use one from a Mk4/5? > > > Andy C > > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group > athttp://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or in > the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or alleged > to be caused directly or indirectly by the instructions contained within this > or related message(s). -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
