hi jin
  my second  fuse box is up behind dash behind the glove box
 mark

On 4 May, 20:55, jin <[email protected]> wrote:
> new it wouldn't be long till I started again
>
> here goes
> ive been trying to get the electric windows to spring into life and
> thought it wouldn't be just a simple case of connecting the plug up
> correctly and of we go.... oh no
>
> in the absence of a live feed (if anybody knows where the fused link
> for the windows should be please please let me know) I temporarily
> wired it to the cig lighter just to get things moving, and move they
> did...... all of 1/2" then jammed dead, fast forwards a full day
> chopping and modifying all the slides and guides iv got satisfactory
> operation (only the drivers side though) but the problem is it rises
> too far, probably 4-5mm and is pushing up the front quarter glass
> surround which I don't like the look of, so
>
> is there a way to limit the travel on the glass? (please don't say I
> have to unbolt the whole slide and bolt on 5mm further down as that
> looks like it could be a pain) is there a simpler way other than
> having to have finger reflexes as quick as John Wayne to flick the
> switch off just as it reaches the top?
>
> as always all answers will be very appreciated
>
> cheers folks
>

-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).

Reply via email to