Having found the immobiliser takes 20mA (for LED) there is a further 70mA drain 
with the alarm armed. The alarm has a LED indicator  (flashing) - having set 
the alarm, I disconnected the LED from circuit, to find no drop! Hmm. The doors 
are locked when the alarm is set, so the next step was to remove the connection 
from the alarm to the door servos. Result was that the current drain goes down 
to zero. I guess that means one (or both) of the lock servos are using some 
current.  From memory, if I disconnect the wiring to one lock the other won't 
work either - does that sound correct? I don't know how I can isolate which one 
it is if they work in unison. Maybe (if it's just a dry joint or something) I 
can wriggle connectors and see any change on the meter? Why would either of 
them flow current? Looks like further investigation needed, but am getting 
closer to a resolution. TBH the drain isn't likely to cause a big problem now 
(unless left for a couple of weeks), but I may as well minimise it. Any clues 
gratefully accepted, Martin

-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).

Reply via email to