Alarm central locking interfaces often have several modes, yours needs to be configured for a pulse output, it should just power the solenoid/servo open or closed for a second or so and then remove all power.
What servos are you using ?
It does sound like a wiring problem but not a dry joint.
They should work independently.
Email me any wiring details and manuals if you can and i'll have a look

Jim


On 28/05/2010 21:06, Susan and Martin Scott wrote:
Having found the immobiliser takes 20mA (for LED) there is a further 70mA drain with the alarm armed. The alarm has a LED indicator (flashing) - having set the alarm, I disconnected the LED from circuit, to find no drop! Hmm. The doors are locked when the alarm is set, so the next step was to remove the connection from the alarm to the door servos. Result was that the current drain goes down to zero. I guess that means one (or both) of the lock servos are using some current. From memory, if I disconnect the wiring to one lock the other won't work either - does that sound correct? I don't know how I can isolate which one it is if they work in unison. Maybe (if it's just a dry joint or something) I can wriggle connectors and see any change on the meter? Why would either of them flow current? Looks like further investigation needed, but am getting closer to a resolution. TBH the drain isn't likely to cause a big problem now (unless left for a couple of weeks), but I may as well minimise it. Any clues gratefully accepted, Martin
--
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).

--
You received this message because you are subscribed to the Google Groups "Quantum 
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor 
the individuals associated with the Quantum Owners Club or in the preparation of the 
above information shall have any liability to any person or entity with respect to 
liability, loss, or damage caused or alleged to be caused directly or indirectly by the 
instructions contained within this or related message(s).

Reply via email to