Hi all,
         I have spent the past 3 months lovingly restoring a
delapidated 2+2 which I bought on E-bay. I had a few little bits to
finish and now the engine has seized!

I was driving along on the motorway and the oil light started to
flicker, I thought maybe a loose conection, but decided to pull off at
the next junction to check anyway. Before I could get there, the oil
light came on perminantly and I lost all power, so I gingerly crossed
3 lanes of traffic and came to a standstill. I opened the bonnet to
check the dip stick, which had nothing on it. So I thought I'd check
else where for oil, but couldn't find any anywhere. I thought that
this was rather strange as I had only checked the oil the week before.

I got towed home and decided to have a cuppa before investigating
further. After my tea I thought I'd check the dip stick again and it
was on max! So I tried to start the engine again, but it wouldn't turn
over. I then put a spanner on the end of the crank, but to no avail.

I can only presume that I have a blockage somewhere?

So, do I strip and recondition this 1600 CVH engine, buy a secondhand
CVH lump or go for a Zetec? Can anyone tell me how involved a Zetec
transplant is and can a carberattor be fitted to avoid changing the
wiring loom?

I look forward to your views.

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).

Reply via email to