Thats a very strange problem.
The oil return from the head is via 3 holes about 15mm dia so i'd be very surprised if they were all blocked. Are you sure the oil wasn't just splashed up the dipstick the first time making it difficult.to see the level.

The main problem with the Zetec transplant is that the spaceframe (which you have probably just restored) needs modifying in several places, cutting out and moving tubes. The other problem is the fuel injection but carbs have been fitted and you can use the later CVH DIS distributorless system with the Zetec crank sensor to solve the problem of no distributor. Unless you go for twin 40 type carbs you will have to modify a CVH inlet manifold to match the Zetec head, or redrill the head to match the manifold studs.

There are lots of details of the CVH to Zetec conversion in the history of this group.
Also look at the Zetec into a XR2 page on my web site at www.quantums.info

Jim


On 03/06/2010 13:31, Rich wrote:
Hi all,
          I have spent the past 3 months lovingly restoring a
delapidated 2+2 which I bought on E-bay. I had a few little bits to
finish and now the engine has seized!

I was driving along on the motorway and the oil light started to
flicker, I thought maybe a loose conection, but decided to pull off at
the next junction to check anyway. Before I could get there, the oil
light came on perminantly and I lost all power, so I gingerly crossed
3 lanes of traffic and came to a standstill. I opened the bonnet to
check the dip stick, which had nothing on it. So I thought I'd check
else where for oil, but couldn't find any anywhere. I thought that
this was rather strange as I had only checked the oil the week before.

I got towed home and decided to have a cuppa before investigating
further. After my tea I thought I'd check the dip stick again and it
was on max! So I tried to start the engine again, but it wouldn't turn
over. I then put a spanner on the end of the crank, but to no avail.

I can only presume that I have a blockage somewhere?

So, do I strip and recondition this 1600 CVH engine, buy a secondhand
CVH lump or go for a Zetec? Can anyone tell me how involved a Zetec
transplant is and can a carberattor be fitted to avoid changing the
wiring loom?

I look forward to your views.

Richard



--
You received this message because you are subscribed to the Google Groups "Quantum 
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor 
the individuals associated with the Quantum Owners Club or in the preparation of the 
above information shall have any liability to any person or entity with respect to 
liability, loss, or damage caused or alleged to be caused directly or indirectly by the 
instructions contained within this or related message(s).

Reply via email to