The KAP hood has the smaller rear window, which does not get creased as much when the hood is down, I have one & was pleased with the quality, Have not checked if my 2+2 wheels stick out as per yours, but my Saloon does by a far greater amount, as do most Saloons I have checked at shows (they have no sub frame), I decided not to worry about it. Rather than skimming the hub or wheel you could just fit a 5mm spacer to one side. John
On Jun 24, 9:39 pm, jin <[email protected]> wrote: > hi all > been busy recently doing odd jobs ill post details later > 2 questions though > firstly which is the best roof to get? > the Quantum and KAP hood are the same price but which is best for > fit / finish and watertightness? > been saving my pennies so will get one in the next few weeks > secondly and quite puzzlingly my passenger front wheel sticks out 5mm > further to the side than the drivers, not really noticeable at first > but now I've seen it it bugs me > I've swapped the wheels over side to side and all is the same so its > not the wheels and nothing looks obviously out of place, taking a > crude series of measurements i think (hope) the subframe has not moved > relative to the bulkhead as it measures up straight (though difficult > to measure accurately) > taking a crude measurement of the suspension, namely the bottom arms > from the inner pivot to the brake disc it appears that that may be the > culprit though i cant be 100% sure as its so tricky to measure > accurately > if this is the case my theory is either the wishbone and / or > balljoint has been replaced on one side with a copy part or second > hand part that does not measure up well? or maybe bent > other than that im unsure, are the wishbones meant to be the same > length both sides? you'd think so but they are different part number > any one have any other ideas? > at worst ill maybe skim 5mm off the wheel or hub but would like to get > to the bottom of this > any help very much appreciated and will be repaid with jaffa cakes :) -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
