the engine has gone pop in the Quantum so now the time is to swap car has a 1.1 at the mo and i want to put in as 1.6 cvh. thing is I'm unsure of exactly what was used to build the car and what i need to swap.
as it stands the car has a 5 speed box and rear anti roll bar (i don't know what difference that makes to spec though) it has solid discs at the front . the drive shafts are not of the type with 6 bolts at the inboard end so i assume they are the type that click in, if I'm correct its only the 1.3 - 1.4 that have the bolt on type so i may be ok? I'm aware i need to change the front right tie bar + mount but id like to keep the gearbox as its sweet so my questions i need to know are... 1. will the cvh bolt up to the ohv gearbox? I'm assuming it may be the same box as they are both 5 speed? 2. ill change the clutch anyway as a matter of course, will any fit or is there a preference? 3. can i re-use the driveshafts? bearing in mind i also want to re-use the hubs? i understand ill also have to faff about with the rad / exhaust etc but can you think of anything else I'm likely to need to alter to fit the 1.6 cvh to the car as is? I'm not after an xr2 replica but just to get the xr2 engine running in the car i really would appreciate it if you can take the time to answer these questions for me much appreciated and thankyou j king -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
