I don't think so, the end cover on the gearbox sticks out further below
the chassis rail.
Maybe if the engine bay was completely empty and you can turn the engine
at an angle.
Strictly speaking the height of garage needed to get the engine out from
above should be the same as that from below, you still need the same
clearance between the 2 parts.
I've done it in a single garage with a engine hoist (not crane) attached
to a 6"x2" wood beam on the garage roof.
Jim
On 12/07/2010 07:22, jin wrote:
cheers for the info guys
would it come out if i removed the battery tray and servo? - i was
planning to remove these anyway?
dont think ive enough height in the garage to lift the car up
cheers for the replies : )
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
