Almost all bearings will have been made by one of a few companys, and
they almost always have the make and part number etched on the side.
If you get the make and part number and contact your local bearing
supplier they will be able to source bearings at much less than Ford prices.
You could also try Burton Power, they sell bearings for Ford gearboxs.
Jim
On 16/09/2010 19:34, xtreme brian wrote:
Thanks for the link, I've seen it before but wasn't sure if the
procedure was the same as mine has push in type shafts,looks the same
though.In the meantime I've won another diff on ebay complete with
driveshafts and hubs for not much more than a rebuild kit so it's a no
brainer if all is ok.By the way Ford want Ł62 each just for 2 pinion
bearings.
Regards Brian.
On 16 Sep, 07:55, Sean<[email protected]> wrote:
A quick google
revealshttp://www.fordscorpio.co.uk/manual/rearaxle/DiffOverhaul.pdf
HTH,
On Sep 15, 12:33 am, xtreme brian<[email protected]> wrote:
Hi All, Does anyone know the preload figures for the pinion assembly
in a 7" sierra open diff?.
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
