Quantum themselves added vents to the rear three-quarter panels of my Mk1 as an after-market mod. The reason is probably lost in the mists of time, but it has conventional windows, not bonded-in ones, so it can't be that. I thought of a couple of reasons: 1) to help with demisting, by changing the air in the car more often, 2) to get rid of possible resonance when the sunroof was removed. Did any of the other Mk1s have them fitted?
On Mar 12, 9:51 am, "Susan and Martin Scott" <[email protected]> wrote: > From what I saw when working at Ford, they all had one-way flap valves about > 150 x 80 trapezium shaped in the bodywork just behind the plastic rear > bumper. > I considered adding some (as well as the vauhall vents in the door pillars) > when I built the saloon, but decided I'd not need them as it is only used as > a summer car. > > ----- Original Message ----- > From: "Eddie" <[email protected]> > To: "Quantum Owners Group" <[email protected]> > Sent: Friday, March 11, 2011 11:51 PM > Subject: [Quantum Owners] Re: Window adhesive failure > > Intresting point this with the glass and pressure. > > The original Fiesta had vents in the 'C' pillars that then in turn > allowed the air to escape through the opening between the tailgate and > the body of the car. > These vents were calculated to completely change the air inside the > car 3 time every minuet at a constant 80 mph as quoted by Ford. > > I will be checking the Ka very carefully when designing the new > Quantum as I don't want this happening on another car. > > Eddie > > On Mar 10, 10:52 pm, "Susan and Martin Scott" > <[email protected]> wrote: > > Oops - when I said "A friend lost a > > tailgate glass at speed a few years ago, when it just popped out of the > > rubber." I should have also said it was a Citroen not a Quantum! > > > ----- Original Message ----- > > From: "Susan and Martin Scott" > > > <[email protected]> > > To: <[email protected]> > > Sent: Thursday, March 10, 2011 10:29 PM > > Subject: Re: [Quantum Owners] Re: Window adhesive failure > > > Is the negative pressure when moving through the air one of the causes? > > The > > side windows seem to suffer worst of all, and the windscreen least of all, > > which could indicate suction created could be the cause. A friend lost a > > tailgate glass at speed a few years ago, when it just popped out of the > > rubber. > > > ----- Original Message ----- > > From: "TonyV" <[email protected]> > > To: "Quantum Owners Group" <[email protected]> > > Sent: Thursday, March 10, 2011 10:38 AM > > Subject: [Quantum Owners] Re: Window adhesive failure > > > As a refinement of the survey, I'd like to know how many of those > > suffering from bonding failure have removed the rear parcel shelf? > > Quanum apparently included it as a stiffening panel. > > The manual says it can be removed, but might cause extra flexing. > > > Count me in as one of those suffering from window bonding failure, > > even though the parcel shelf is still in place. > > Both rear/side and rear screens need re-fitting. > > > I re-did both rear side windows about 3 years ago, using one a window > > bonding kits from ebay designed for fitting van screens. > > It didn't look bad when first done, but voids started appearing very > > quickly. > > All instructions followed, glass scrupulously clean, supplied primers > > used, correct amount applied as determined by the included tool, etc. > > > But the car has been stood still for 2 out of the intervening 3 years, > > and the voids have continued to get worse - to the point where algae > > is now growing between the adhesive and glass. > > So it's more than just flexure of the shell causing the problems. > > > Here's another suggestion. > > The car doors used to be quite difficult to close, due to air pressure > > inside the car. Not a problem with the windows open. > > And it's not a problem any more. The reason is that the rear window > > now lifts slightly and allows the extra pressure to escape! > > Which is a bit alarming... But I do wonder if this might have > > something to do with the initial separation of the windows. > > So, an extra hidden vent might be a benefit. > > > Obviously, once a void is established which can get water into it, > > freeze/thaw will expand the void with each cycle. > > > I now have my own sand blaster, so will probably try using that on the > > glass to give a primed finish this time around. > > Once done, I'll also probably have them professionally fitted (need > > new rear screen glass anyway due to a few broken elements in the > > demister). > > > And one other refinement - the side windows currently have a slight > > gap around the glass, which provides a void which will allow water to > > become trapped. > > I might well fill this gap with silicone, to keep water out and also > > increase the amount of bonding area available. > > > Tony Vincent. > > > On Mar 10, 12:58 am, [email protected] wrote: > > > In a message dated 09/03/2011 20:54:10 GMT Standard Time, > > > > [email protected] writes: > > > > The reason for the rear glass un-glueing is due to flexure in the > > > bodyshellat at the rear. > > > > It would be interesting to do a check - maybe via the magazine or at the > > > Stoneleigh meeting > > > -- > > You received this message because you are subscribed to the Google Groups > > "Quantum Owners Group" group. > > To post to this group, send email to [email protected] > > To unsubscribe from this group, send email to > > [email protected] > > For more options, visit this group > > athttp://groups.google.com/group/quantumowners?hl=en > > > IMPORTANT NOTE: All information presented herewith is provided on an "As > > Is" > > basis, without warranty or the implication thereof. Neither the Quantum > > Owners Club nor the individuals associated with the Quantum Owners Club or > > in the preparation of the above information shall have any liability to > > any > > person or entity with respect to liability, loss, or damage caused or > > alleged to be caused directly or indirectly by the instructions contained > > within this or related message(s). > > > ----- > > No virus found in this message. > > Checked by AVG -www.avg.com > > Version: 10.0.1204 / Virus Database:1497/3494- Release Date: 03/09/11 > > > -- > > You received this message because you are subscribed to the Google Groups > > "Quantum Owners Group" group. > > To post to this group, send email to [email protected] > > To unsubscribe from this group, send email to > > [email protected] > > For more options, visit this group > > athttp://groups.google.com/group/quantumowners?hl=en > > > IMPORTANT NOTE: All information presented herewith is provided on an "As > > Is" > > basis, without warranty or the implication thereof. Neither the Quantum > > Owners Club nor the individuals associated with the Quantum Owners Club or > > in the preparation of the above information shall have any liability to > > any > > person or entity with respect to liability, loss, or damage caused or > > alleged to be caused directly or indirectly by the instructions contained > > within this or related message(s). > > > ----- > > No virus found in this message. > > Checked by AVG -www.avg.com > > Version: 10.0.1204 / Virus Database:1497/3497- Release Date: 03/10/11 > > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group > athttp://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or > in the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or > alleged to be caused directly or indirectly by the instructions contained > within this or related message(s). > > ----- > No virus found in this message. > Checked by AVG -www.avg.com > Version: 10.0.1204 / Virus Database: 1498/3501 - Release Date: 03/11/11 -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
