I don't think the cradle is different between the models.
But, i'd think enough damage to cause your problem would be quite obvious.
I worked on a H4 with this problem and found it had the wrong wishbones
fitted, i've pictures somewhere.
I think the difference was power steering or non-power steering wishbones.
Jim
On 17/04/2011 18:24, Pete M wrote:
I'm attempting to cure the wobbly gearbox problem on my H4, i.e. where
the nearside driveshaft seems too long. I've played around with
engine alignment and changed the lower arms but it's still there. I'm
not convinced that the gearbox cradle's not slightly distorted as the
donor had had a reasonably hard front impact, so I've been looking for
a replacement. Ford don't stock them anymore, so I'm after one from a
scrappy/eBay, but does anyone know if the Zetec-engined (or mk3.5)
Fiestas had a different cradle to the CVH engined ones? I'd have
thought not, as they both used the same BC gearbox, but.....
Pete
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
