I was going to say that wasn't standard but actually, i think i have got a
pair of bolts on the inside of my hood in roughly that location.
I'll try to remember to have a look later.
My hood was factory fitted by Stourbridge Quantum, one of the few bits of
the build i didn't do as i wasn't convinced i'd get it right.
I bought the hard top as well and lined all the glass up to that during the
build.
Jim
--------------------------------------------------
From: "jin" <[email protected]>
Sent: Wednesday, August 31, 2011 9:16 PM
To: "Quantum Owners Group" <[email protected]>
Subject: [Quantum Owners] 2+2 hood fitting question
hi guys
can anyone confirm either way if the hood header rail should have
little bits of metal screwed on either side inside the fabric?
http://i120.photobucket.com/albums/o192/jindal/DSC01924.jpg
that came off like so
http://i120.photobucket.com/albums/o192/jindal/DSC01923.jpg
the one was cut much deeper than the other to compensate for the
drivers window glass sitting 3/4" lower, now they both sit 4mm from
the GRP header rail, do i still need these? has anyone else got them?
also i noticed when removing them that the inner flap / side of the
hood was screwed to the header rail at the sides with 2x 3mm bolts
through the holes you can see, is this normal? the build manual just
states glue
any help much appreciated folks
thanks
--
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As
Is" basis, without warranty or the implication thereof. Neither the
Quantum Owners Club nor the individuals associated with the Quantum Owners
Club or in the preparation of the above information shall have any
liability to any person or entity with respect to liability, loss, or
damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
