Anybody got an XR2 wiring loom up for grabs? There are a few faults in my existing loom (started with interior light, now has intermittent instruments etc).
Since it's been modified by a hamfisted Luddite to fit a large stereo/ amp, electric windows, central locking, electric mirrors, original XR2 engine and then again for the RST engine, I'm thinking it would be easier to start again from an unmodded loom rather than compound the problem with my Endura fit. I know there's one on ebay at the moment, but at £75 it seems expensive when the seller says he's cut some connectors off it. Or should I ditch the Ford loom entirely and start making my own? Maybe use one of those CBS pre-wired thingies? I've never been happy with the dodgy fusebox and grey-turning-to-brown wires which are nestled around it anyway... TonyV. -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
