I may have one, there is one in the stuff i'm sorting out at the moment
but i don't know how modified it was in the donor Fiesta.
Jim
On 15/10/2011 12:31, TonyV wrote:
Anybody got an XR2 wiring loom up for grabs?
There are a few faults in my existing loom (started with interior
light, now has intermittent instruments etc).
Since it's been modified by a hamfisted Luddite to fit a large stereo/
amp, electric windows, central locking, electric mirrors, original XR2
engine and then again for the RST engine, I'm thinking it would be
easier to start again from an unmodded loom rather than compound the
problem with my Endura fit.
I know there's one on ebay at the moment, but at £75 it seems
expensive when the seller says he's cut some connectors off it.
Or should I ditch the Ford loom entirely and start making my own?
Maybe use one of those CBS pre-wired thingies?
I've never been happy with the dodgy fusebox and grey-turning-to-brown
wires which are nestled around it anyway...
TonyV.
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
