Should there be a sandwich plate on the inside of the boot on the panhard-bracket fixingbolts? Or should there be any other mounts? On mine, there are just two washers, and the bootfloor isn't quite flat in there. (In the space betweeen the boot and the rear bench, I mean) Is the area too weak for washers?
Please explain, Rolf On 14 nov, 23:21, Steve Kodz <[email protected]> wrote: > I'm hoping someone on hear may be able to help me trace the current owner of > Q2-245. Within some spares donated to the QMOPS project I have found mounts > for the panhard rod that should have been fitted to the car as a safety > upgrade. I have already contacted the last known club member owning this > car, who was helpful, but couldn't locate any contact details for the new > owner. > > If you own the car, or know who does/might please contact me off list. > > Regards, > Steve > --www.h4-turbo.co.ukwww.quantumowners.co.ukwww.quantumcars.co.ukwww.quantumheritage.co.uk -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
