Further to this, I've gone ahead and ordered some 1.8mm stainless control cable and fittings and will have a go at making my own. If anyone else has a similar problem, these people supply small quantities of cable and fittings at very reasonable prices with no minimum order....less than £10 for cable and fittings for both doors....universal kit on Ebay £18 per door...
http://www.tecni-cable.co.uk/ Dave On Mar 1, 7:36 pm, Dave C <[email protected]> wrote: > I have stuck windows on a 2+2 and have pulled the electric winders and > found that the cable has broken so need to replace....does anyone know > offhand a source of replacements or do I need to make my own....I can > get bulk 2mm stainless control cable but attaching the ends is a > problem....I have soldered ends on stainless cable before and have > special flux but it would be easier if I could get some ready made. > Also, does anyone know what the wiring is to the central locking > actuators....mine appear to have five wires, two and three....I'm > assuming the two are permanent supply and the three are > control...lock, ground and unlock but don't know for sure and want to > test by direct connection so I can figure why they're not working. > > Thanks > > Dave -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
