drill the join through both sections and add a steel pop rivet, this will stop the rotation, another common mod isto add a seperate mount off the back edge of the fuel tank
On Aug 10, 11:07 pm, Gary <[email protected]> wrote: > On the mk 3.5 1.6 zetec the downpipe has a pip / line of welded at the > join say one inch along the side of the exhaust. > the split in the mid section has one slit bigger than the other. my > understanding is the pip will aid in stopping the pipe rotating. you > could try something similar. > > Qless > Gary > > On 10/08/2012 08:35, Jim Hearne wrote: > > > > > I take it when you say the exhaust �was scraping the floor� you mean > > it was touching the ground not the floor of the car. > > This is the problem with the Mk2 Fiesta exhausts, the entire rear of > > the system is offset across the car and only has supports on the > > outside of the system. > > It relies on the clamp between the exhaust and the downpipe to stop > > the exhaust system twisting as you�ve found. > > It maybe that you�ve got a slight mismatch in size between the new > > downpipe and the old exhaust system and the joint can�t be tightened > > enough to stop the rotation. > > If there is a gap you maybe able to shim it using a strip of metal cut > > off a old tin can or similar. > > Use silicone sealant on the joint as well, works much better than the > > old exhaust paste. > > This is why i think the downpipes crack as well, they are taking all > > the twisting force from the weight of the exhaust system trying to turn. > > I�ve added some extra support brackets on the exhaust on my Mk2 and > > Quantum 2+2 and saloon so that the exhaust system is self supporting > > without being connected to the downpipe. > > Jim > > *From:* calvin cotton <mailto:[email protected]> > > *Sent:* Thursday, August 09, 2012 5:48 PM > > *To:* [email protected] > > <mailto:[email protected]> > > *Subject:* [Quantum Owners] moving exhaust > > hi again, firstly a big thank you to everyone who helped me out with > > the earlier stuff, i bought a new downpipe and fitted it easily but > > now have a problem... after fitting the downpipe i took the car out > > for a quick drive to see and heard scraping, the exhaust had twisted > > (and therefore dropped) and was scraping the floor, i took the car > > back jacked it up again and reajusted the exhaust again tightened the > > bolts further and gave the exhaust a good shaking and it was very > > solid, i dropped the car back down and took it out again but the same > > problem occurred, got back in and the exhaust had twisted again, has > > anyone had this problem before? > > thanks > > calvin > > -- > > You received this message because you are subscribed to the Google > > Groups "Quantum Owners Group" group. > > To post to this group, send email to [email protected] > > To unsubscribe from this group, send email to > > [email protected] > > For more options, visit this group at > >http://groups.google.com/group/quantumowners?hl=en > > > IMPORTANT NOTE: All information presented herewith is provided on an > > "As Is" basis, without warranty or the implication thereof. Neither > > the Quantum Owners Club nor the individuals associated with the > > Quantum Owners Club or in the preparation of the above information > > shall have any liability to any person or entity with respect to > > liability, loss, or damage caused or alleged to be caused directly or > > indirectly by the instructions contained within this or related > > message(s). > > -- > > You received this message because you are subscribed to the Google > > Groups "Quantum Owners Group" group. > > To post to this group, send email to [email protected] > > To unsubscribe from this group, send email to > > [email protected] > > For more options, visit this group at > >http://groups.google.com/group/quantumowners?hl=en > > > IMPORTANT NOTE: All information presented herewith is provided on an > > "As Is" basis, without warranty or the implication thereof. Neither > > the Quantum Owners Club nor the individuals associated with the > > Quantum Owners Club or in the preparation of the above information > > shall have any liability to any person or entity with respect to > > liability, loss, or damage caused or alleged to be caused directly or > > indirectly by the instructions contained within this or related > > message(s).- Hide quoted text - > > - Show quoted text - -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
