Some photos of the lock in-situ in the Mk3 Fiesta at: http://www.fiestaguides.co.uk/content/clewbr.html The 21st (!) photo shows the two actuating arms attaching to the two holes in the lock release arm - the one furthest from the pivot is for the manual release (via the outside key barrel) and the second hole is for the arm from the solenoid release. Both arms clip into the holes separately using the little white nylon grommet/clip thingys. I had a problem on my car in that the boot release was a bit difficult to operate, and eventually the plastic clip broke/fell out with the boot closed, and it took me a lot of effort to get the boot open again without significant damage. BTW, the hole in the side of the clip is to bolt the clip onto part of the tailgate frame - see : http://www.fiestaguides.co.uk/content/mk3_locks.html Photos 11 and 12 show the clip in place, and photo 14 shows the lock mechanism and rods with the clip removed. This is a useful description, as both versions of the Mk3 Haynes manual show no detail of this area - some of the other guides on this site are useful. See also fiestaturbo.com for other useful guides, e.g. http://www.fiestaturbo.com/forums/guide-coding-your-keys-and-rebuilding-your-locks-vt169403/ for a description on how to make matching locks from the uncoded Ford barrel kits. Chris
On Saturday, November 30, 2013 12:33:53 PM UTC, Parky wrote: > Hi, I've just bought an H4i with a number of small issues to fix. Can > someone kindly tell me how to fix the boot lock onto the boot lid? What I > have is the boot lock and a small plate bent in the middle at 90 degrees > with a cut out on the one side and a small hole on the opposing side and > for the life of me I cannot figure out how you attach/lock the plate ont > the boot lock. Am I missing another part or am I just thick? > > Regards > > Richard > -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
