Thanks for the reply, I'll bear that in mind. Stephen
On Monday, 29 August 2016 16:57:27 UTC+1, john beckett wrote: > > Hey, > > Speaking from the experience of replacing the engine in mine several > times. I always just unbolt the cradle off the frame and the engine mount > off the other side and drop the engine and gearbox down on the floor > (carefully not to crack the sump) then I jack the body up and put axle > stands under the frame at the back of the engine bay then there is just > enough room to slide the engine out of the front. > > John b -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
