Think I will need another plan, removing all to measure (while a pain) may be an option, but a run to Stoneleigh from Scotland to measure wheel gap, probably not. Back to the drawing board.
Calum On Saturday, 1 April 2017 21:45:50 UTC+1, Jim Hearne wrote: > All the Quantum ones were red as far as i know. > If they are black original Ford ones they will have 2 or 3 coloured bands > about 1cm wide painted round a turn of the coil. > > You only real way of finding out is to take the springs off the car and > measure them. > Or wait until Stoneleigh and measure the ride height of some of the other > 2+2's there with known suspension setups. > > Jim > > > On 01/04/2017 19:25, calum mcpherson wrote: > > > > > > > > * Springs are black, not Red and I can see no markings on them. As said > previously rear springs are sitting at 250mm approx. with car sitting on > ground, so at a guess might be about 307mm (std rear 1100cc length) when > not under load. So the spacer on Rear shock (about 50-60mm) can be removed > and std.1100cc springs fitted , which I would assume would give a drop, > assuming existing springs are indeed the extended 'Quantum' one's, but > would this give drop if rears are not ,and how much would you think? By > fitting XR2 springs to front (assuming not XR2 at present) would give at > max about 30mm(depending on manufacturer),which would be fine. Sorry to be > a pain on this, but don't want to spend money and not get the results I > want, thanks again. Calum. * > ------------------------------ > *From:* [email protected] <javascript:> > <[email protected]> <javascript:> on behalf of Jim Hearne > <[email protected]> <javascript:> > *Sent:* 01 April 2017 18:38:56 > *To:* [email protected] <javascript:> > *Subject:* Re: [Quantum Owners] Re: Lowering springs for my 2+2. > > The long springs for the rear of the early 2+2's are longer still than > 1100 springs. > They were made specially for Quantum. > > On the later 2+2's they corrected the spring and shock mountings and > standard 1100 springs are used. > The main reason for using the 1100 springs on the rear was that the rear > of the 2+2 is much lighter than the rear of a Fiesta and the 1100 springs > were softest. > > The front springs were recommend to be Quantum spec as well, i believe > these were uprated springs but with a non XR2 length. > > What colour are the springs on your 2+2 ? > If red they are probably Quantum springs. > > In my opinion your next stage is to fit standard XR2 springs on the front > and standard 1100 springs on the rear and remove the spacer from the top of > the rear shocks. > > Jim > > > > > > On 01/04/2017 17:52, calum mcpherson wrote: > > Ok, 32 replies and tbh, still not clear on options, from what I've heard > from replies I have established the following (I think) which is a great > help > > As it has been confirmed (by Jim Hearne) my car appears to be an early > model 2+2 and as such needs the longer rear springs (recommended by several > to get 1100 springs) and front springs can be XR2 or 1.4 model springs. > > So, are std. 1100 rear springs indeed the 'longer' springs as required or > do I need extra long 1100 springs ? (on checking spring sizes I see std. > 1100 springs are approx. 307mm long) > > Front springs seem fairly simple and got my head round them, however the > whole idea of my enquiry was to improve the 60mm rear and 70mm front wheel > arch gap. My springs at present all work fine, and as I never fitted them > and have no history on them I don't really know what is fitted, so is there > actually a solution to my problem, I want to reduce wheel gap by about 35mm > ? > > I appreciate all replies, with pics would be a great help. > > Thanks, > > Calum. > > > > On Wednesday, 29 March 2017 21:52:01 UTC+1, calum mcpherson wrote: > >> I've recently changed my wheels 15" with 195-50-15 tyres to the correct >> set up 14" with 185-55-14, and my 2+2 looks like a Land Rover. >> I was going to change springs anyway, but now have brought this job >> forward as not looking as I want. >> I understand that the manual states 'Quantum red springs' for front and >> Fiesta mk2 1100 springs for rear, however when looking at lowering springs, >> most seem to be a standardised Fiesta mk2 set up , most covering full range >> excluding XR2 !!!! >> >> Anyone got any experience with lowering springs , any recommendations >> would be great . >> >> Car has std. XR2 engine set-up, thanks. >> > -- > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] <javascript:> > To unsubscribe from this group, send email to [email protected] > <javascript:> > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As > Is" basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or > in the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or > alleged to be caused directly or indirectly by the instructions contained > within this or related message(s). > --- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > For more options, visit https://groups.google.com/d/optout. > > > -- > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > <javascript:> > To unsubscribe from this group, send email to > [email protected] <javascript:> > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As > Is" basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or > in the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or > alleged to be caused directly or indirectly by the instructions contained > within this or related message(s). > --- > You received this message because you are subscribed to a topic in the > Google Groups "Quantum Owners Group" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/quantumowners/MyARgF6QNqU/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected] <javascript:>. > For more options, visit https://groups.google.com/d/optout. > -- > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > <javascript:> > To unsubscribe from this group, send email to > [email protected] <javascript:> > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As > Is" basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or > in the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or > alleged to be caused directly or indirectly by the instructions contained > within this or related message(s). > --- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > For more options, visit https://groups.google.com/d/optout. > > > -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
