As always...... measure 3 times and cut once! Without seeing the shape you are cutting out, my suggestion is, having marked the cutout, to drill any 'corners' and then join them up using a hand (leather glove) held hacksaw (or handle specially made for the job) keeping within the lines, and use a carborundum file or some 60 grit paper glued to a piece of wood to clean up accurately to the lines. It is worth sealing cut fibre ends with some resin to prevent any water wicking into the matting. Martin ----- Original Message ----- From: calum mcpherson To: Quantum Owners Group Sent: Friday, August 25, 2017 9:31 PM Subject: [Quantum Owners] Bonnet cutting for vents 2 + 2
So having purchased the vents I need to cut 2 holes in my bonnet , so I want to get it right. Has anyone any advice on best way to cut apertures, best tools to do job ,am I better sealing cut fibreglass ends to prevent/reduce spiderweb damage to surrounding area. ANY advice greatly appreciated. Thanks in advance Calum. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. Virus-free. www.avg.com -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
