Managed to get things working again , turned out was a dodgy bullet connector on the 3rd wire which is not in the std. wiring to the cover motor, this was on other side from relay on wiring up to motor . Never mind , another Quantum lesson , thanks for advice guys.
Calum On Thursday, 25 January 2018 12:52:19 UTC, calum mcpherson wrote: > Covers stopped working but sidelights , headlights still work , so changed > Relay , still no joy. Disconnected motor for covers at rod , headlights > still all ok & sidelights. > Ignition on but engine not running all fine on the light front , start > engine and there is a noise (sounds like coming from engine , def. not > from motor for headlights) , I have tried disconnecting cables individually > from relay , have even removed relay completely and noise still there , but > only when engine running ????? > HEEEELP > -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
