Hi All,

Just out of interest I have definitely got a pair KYB springs, RA 1370. (with 
new KYB dampers to match)  Ride 4.1 inches.   

For comparison my Jag XF ride height is 5.3 inches to the engine under tray.  

Found my old unbroken red spring measures 285 mm at the longest on the bench 
after being fitted in 2000 and taken off end 2018…….!  (dia 10.5mm thick coil)  
 Seems very close to the KYB?

Happy drumming Chris. 

Derek







> On 12 Apr 2019, at 15:17, chris.quant via Quantum Owners Group 
> <[email protected]> wrote:
> 
> According to my research a few years back (only just spotted it on my notice 
> board).............
>  
> KYB;
> Front springs - RA 1370 is 1.6 XR2 at 290mm long
>                       - RA 1196 is 1.1 to 1.4 at 308mm long
>  
> Dampers are the same across the range.
>  
> Rear springs – NOT XR2
>                      - RA 5045 – 10mm thick – 307mm long
>                      - RA 5288 – 11mm thick – 295mm long but stiffer – listed 
> for fiesta van (heavy duty) – I’ve got these on the rear of my saloon as I 
> sometimes needed to carry a drum kit...
>  
> Chris G
>  
> From: 'teegee777' via Quantum Owners Group 
> <mailto:[email protected]>
> Sent: Friday, April 12, 2019 11:27 AM
> To: Quantum Owners Group <mailto:[email protected]>
> Subject: [Quantum Owners] Re: Coil springs 2+2
>  
> I got the local autoshop to order me some new compatible coil springs, he 
> came up with KYB K-Flex RA1370 coils springs, for an XR2 1.6. (£42 a pair , 
> 2019 prices). The car passed it's MOT. It seems a lot harder (unfortunately, 
> as I live in the country and I feel the bumps) The car does seem to be 
> slightly higher (they were about 300mm long and 10.4 mm thick coils) Thanks 
> for all your help and suggestions. Is it worth keeping the old red spring for 
> anyone (the unbroken one!), or has it had it's life now?
> 
> On Wednesday, 3 April 2019 08:07:30 UTC+1, teegee777 wrote:
>> 
>> The 2+2 failed its MOT today with just a broken front coil spring, I tried 
>> telling the MOT guy that Quantums have dual springs on the front but he 
>> didn't seem to believe me. I guess this repeats an old train of posts,but 
>> I've trailed through them and can't find a cheap answer ! (I don't want to 
>> change to adjustable Spax). I appear to have red quantum springs, Off the 
>> car they measure about 262mm by 107mm diameter. Is there a modern equivalent 
>> to put on which is about the same size/tension etc? I believe that the 
>> Quantum red springs are no longer available? Thanks Tony
> -- 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Quantum Owners Group" group.
> To post to this group, send email to [email protected]
> To unsubscribe from this group, send email to 
> [email protected]
> For more options, visit this group at 
> http://groups.google.com/group/quantumowners?hl=en 
> <http://groups.google.com/group/quantumowners?hl=en>
>  
> IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
> basis, without warranty or the implication thereof. Neither the Quantum 
> Owners Club nor the individuals associated with the Quantum Owners Club or in 
> the preparation of the above information shall have any liability to any 
> person or entity with respect to liability, loss, or damage caused or alleged 
> to be caused directly or indirectly by the instructions contained within this 
> or related message(s).
> --- 
> You received this message because you are subscribed to the Google Groups 
> "Quantum Owners Group" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected] 
> <mailto:[email protected]>.
> For more options, visit https://groups.google.com/d/optout 
> <https://groups.google.com/d/optout>.
> 
> -- 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Quantum Owners Group" group.
> To post to this group, send email to [email protected]
> To unsubscribe from this group, send email to 
> [email protected]
> For more options, visit this group at 
> http://groups.google.com/group/quantumowners?hl=en 
> <http://groups.google.com/group/quantumowners?hl=en>
>  
> IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
> basis, without warranty or the implication thereof. Neither the Quantum 
> Owners Club nor the individuals associated with the Quantum Owners Club or in 
> the preparation of the above information shall have any liability to any 
> person or entity with respect to liability, loss, or damage caused or alleged 
> to be caused directly or indirectly by the instructions contained within this 
> or related message(s).
> --- 
> You received this message because you are subscribed to the Google Groups 
> "Quantum Owners Group" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected] 
> <mailto:[email protected]>.
> For more options, visit https://groups.google.com/d/optout 
> <https://groups.google.com/d/optout>.

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to