HI All, Checking through my wiring again and found the wiring fault is a transposition of wiring terminals in the relay socket. The original one was a type A and it seems everything for sale aftermarket now is a type B. The pins 30 & 86 are reversed. They are the constant 12V and Earth on the diagram!
Continuity checking the wiring and it all seems OK otherwise. The motor still runs correctly when isolated and powered by external battery, just not given the right signal due to the relay/wiring configuration. Found a website that explained it. https://www.12voltplanet.co.uk/relay-guide.html <https://www.12voltplanet.co.uk/relay-guide.html> Did not even know it was a possible to have a difference. So pass it on to stop us being caught out. Was type A a flasher relay perhaps? ATB Derek > On 4 Aug 2019, at 15:03, kynastonp . <[email protected]> wrote: > > If you want a neat package and 1000 volts peak reverse volts try digi-key > part number gbpc3510-nd even has a hole for a mounting bolt. All the diodes > do is drive the relay to position the headlamp cover motors so only the coil > current of the relay is passed through the diode. > > Get Outlook for Android <https://aka.ms/ghei36> > From: [email protected] <[email protected]> on > behalf of Julian Coleman <[email protected]> > Sent: Sunday, August 4, 2019 2:35:49 PM > To: [email protected] <[email protected]> > Subject: Re: [Quantum Owners] Nose Cone Wiring > , > 10A is certainly enough current handling capacity for a couple of indicators > and it may well be that the diodes are not subjected to significant back emf. > > > If it's working, they're probably fine. But if it fails, consider getting a > diode with a higher reverse voltage rating. Of course getting one that is > encapsulated is not going to be easy, but there are easy ways to solve that > problem. > > Meanwhile, don't worry. > > Julian Coleman > City Audio Services > > > > ----- Original Message ----- > From: > [email protected] > > To: > <[email protected]> > Cc: > > Sent: > Sun, 4 Aug 2019 13:04:11 +0100 > Subject: > Re: [Quantum Owners] Nose Cone Wiring > > > Eek, I didn't know there were different sizes...... > > When I rewired mine I got these from car builders solutions. > > https://www.carbuildersolutions.com/uk/silicon-diode > > They seem to work and they were the only diodes they sell. > > Chris G > > -----Original Message----- > From: Derek Clews > Sent: Saturday, August 3, 2019 8:59 PM > To: Quantum Owners Club > Cc: Derek Clews > Subject: [Quantum Owners] Nose Cone Wiring > > Dear All, > > In the Q manual the nose cone wiring has two diodes. The values required > are not mentioned. What was the Quantum spec? > > I appreciate it is in a 12V system so 15 or 16 volt would cover, but does > anyone know the minimum wattage? > > Thanks > > Derek > > -- > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or > in the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or > alleged to be caused directly or indirectly by the instructions contained > within this or related message(s). > --- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/quantumowners/CA4DE282-C74A-4E9C-A130-E4412D4EB944%40gmail.com. > > > > -- > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or in > the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or alleged > to be caused directly or indirectly by the instructions contained within this > or related message(s). > --- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/quantumowners/319E86D8596947CBBE5A80C54EF24F4A%40HomeNew. > > -- > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > <http://groups.google.com/group/quantumowners?hl=en> > > IMPORTANT NOTE: All information presented herewith is provided on an "As Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or in > the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or alleged > to be caused directly or indirectly by the instructions contained within this > or related message(s). > --- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web > visithttps://groups.google.com/d/msgid/quantumowners/0836f8b9900fde6df6a0c4c3ad121ab29a157e10%40www.outitgoes.com > > <https://groups.google.com/d/msgid/quantumowners/0836f8b9900fde6df6a0c4c3ad121ab29a157e10%40www.outitgoes.com?utm_medium=email&utm_source=footer>. > > -- > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > <http://groups.google.com/group/quantumowners?hl=en> > > IMPORTANT NOTE: All information presented herewith is provided on an "As Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or in > the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or alleged > to be caused directly or indirectly by the instructions contained within this > or related message(s). > --- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/quantumowners/AM6PR04MB6424142C62A52DD3109AAD9EACDB0%40AM6PR04MB6424.eurprd04.prod.outlook.com > > <https://groups.google.com/d/msgid/quantumowners/AM6PR04MB6424142C62A52DD3109AAD9EACDB0%40AM6PR04MB6424.eurprd04.prod.outlook.com?utm_medium=email&utm_source=footer>. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/7A0AC494-A261-4B1A-B3A3-BD7554753CAA%40gmail.com.
