Have a look in the qmops parts as there is a box of o rings there :) On Fri, 28 Feb 2020, 10:52 'Steve Kodź' via Quantum Owners Group, < [email protected]> wrote:
> I'm about to order the parts so I can (finally) replace the cam shaft in > my Xtreme, but I currently cannot find a O ring for the oil spray bar. > Searching online there appears to be differing advice as to whether > these are required or not. When I removed my oil spray bar there was no > O ring and I'm wondering if this contributed to the wear and failure. > To me it would make sense to have a seal fitted to help ensure the > pressure is maintained into the spray bar. > > I spoke to Burton and they don't stock these and possibly never have, so > it makes me wonder if they are required after all. Fordopedia doesn't > show any O ring - if you follow the line for components 17 and 18 I > would expect to see it listed between the head and component 16. > > http://www.fordopedia.org/parts-catalog/pinto-ohc/B2.10 > > Has anyone a source for a suitable O ring, or do I just fit without? > > Regards, > Steve > > -- > h4-turbo.co.uk > quantumowners.co.uk > > -- > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As > Is" basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or > in the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or > alleged to be caused directly or indirectly by the instructions contained > within this or related message(s). > --- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/quantumowners/86cef54e-7f95-55b8-385a-7ae5dab1d85b%40h4-turbo.co.uk > . > -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/CAMZeUY6o%2BgR78cDvPrSeP6bwPXJY9hTDoVeJPc%3DKx7-vKV7xgg%40mail.gmail.com.
