Just wanted to share a modification i made to the bonnet hinges on the 2+2. Mine were damaged and coming away from the main moulding, the holes had enlarged too. I made a grp block using two layers of 450gsm then 6 layers of 2mm core mat, then two further layers of 450gsm, i a shape i had made a card template of. I did this on a bit of lightly waxed melamine with a plasticine ring around it to keep the resin contained. Once set i machined for a 10mm ball race(26mm od x 8mm wide).a stainless steel double seal version was used. This block was the glassed in place back onto the bonnet. Now with the bolts tight it pivots smoothly on the bearing! No more grinding!
-- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/65aaf96a-d74a-43b4-9ed2-9c471d0a732e%40googlegroups.com.
