I have had contact with specialists in Coventry. They seem to be more into racing and modifying as the main workstream but would help with or build whatever you wanted. Also had a gearbox reconditioned around five years ago and that was fine. Tried looking at reconditioning a starter motor but decided it was not worth it.
Derek > On 26 Mar 2021, at 16:45, Jim Hearne <[email protected]> wrote: > > I remember all a lot of engine re-conditioners needed was a pressure washer > and a can of black spray paint... > Fixes all problems... > > Does anybody get an engine reconditioned nowadays ?, i think most normal > cars would be scrapped if they needed a engine rebuild, either that or > another s/h engine fitted. > > Jim > > > From: [email protected] <> > Sent: Friday, March 26, 2021 4:29 PM > To: Quantum Owners Group <> > Subject: Re: [Quantum Owners] 2L Zetec Blacktop Pistons > > I was planning to drop a 2.0l blacktop and possibly turbo into my saloon. > This piston availablity issue is making me think twice. Is it the same > problem for the old silvertop? How many manufacturers are there for standard > type pistons? Wondering how the engine reconditioning businesses source their > pistons. > > John > > On Thursday, 25 March 2021 at 18:36:23 UTC [email protected] wrote: >> Thanks Jim, will respond to your other later, some interesting points! >> Oversize pistons for blacktop are quoted for on plenty of web sites, but are >> never available. Supplier calls the manufacturer and they all come back with >> same story. >> Regards >> >> On Thu, 25 Mar 2021, 16:23 Jim Hearne, <[email protected] <>> wrote: >>> As you say, i don’t think Ford sells pistons for a Black top Zetec as a >>> spare, they want you to replace the whole bottom end. >>> The Zetec SE is the same. >>> >>> Jim >>> >>> >>> From: susanandmartin <> >>> Sent: Thursday, March 25, 2021 3:28 PM >>> To: [email protected] <> >>> Subject: RE: [Quantum Owners] 2L Zetec Blacktop Pistons >>> >>> Not that it helps with your quest, but (hopefully) of interest. >>> When I was working at Ford we had an engine being tested for cold start >>> durability at a University. As proof (if it was ever needed) that starting >>> an engine repeatedly from cold with a fuel-enriched intake mixture would >>> wreck an engine, there was a need for new pistons after several months and >>> x000’s of start procedures. When trying to source new pistons, however, it >>> was found they were not listed as a spare and could only be bought with an >>> engine block. As this wouldn’t help our engine block durability testing, >>> great discussions ensued taking several hours and it was agreed some >>> pistons could be supplied direct from the assembly line (maybe one car was >>> released without pistons? 😊). This is a good example of how Ford goes to >>> great lengths with their testing (and probably other manufacturers do as >>> well). >>> Martin Scott >>> >>> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows >>> 10 >>> >>> From: Nigel Plant <> >>> Sent: 25 March 2021 12:15 >>> To: Quantum Owners Group <> >>> Subject: [Quantum Owners] 2L Zetec Blacktop Pistons >>> >>> >>> Probably one that's right up Jim's street. Does anyone have the Ford >>> specification for 2L Zetec blacktop pistons. Need gudgeon pin diameter, >>> compression height essentially all the key dimensions. I have broken a >>> piston on my Xtreme turbo such that it needs reboring and cannot get any >>> standard but oversize pistons. Am also told that Nural and Mahle have no >>> production plans to manufacture any. I can get forged pistons and rods, >>> which would be better performance wise but didn't want to drop compression >>> to 8:1 or fork out £1200. 9:1 is my ideal for the power I want. I have >>> found a custom piston manufacture for forged pistons alone, but they >>> require a piston (no problem) and the key specs. >>> >>> For information, I have learnt one interesting point that people may find >>> useful. Although the silvertop and black top have different length conrods >>> (ctr to ctr) and different compression heights. The combined total of >>> conrod length and compression height for the silvertop and blacktop are the >>> same, meaning a set of silvertop conrods and pistons can be used to replace >>> the blacktop ones. >>> >>> Thanks for any help on the specs. >>> >>> Nigel Plant >>> -- >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Quantum Owners Group" group. >>> To post to this group, send email to [email protected] <> >>> To unsubscribe from this group, send email to >>> [email protected] <> >>> For more options, visit this group at >>> http://groups.google.com/group/quantumowners?hl=en >>> <http://groups.google.com/group/quantumowners?hl=en> >>> >>> IMPORTANT NOTE: All information presented herewith is provided on an "As >>> Is" basis, without warranty or the implication thereof. Neither the Quantum >>> Owners Club nor the individuals associated with the Quantum Owners Club or >>> in the preparation of the above information shall have any liability to any >>> person or entity with respect to liability, loss, or damage caused or >>> alleged to be caused directly or indirectly by the instructions contained >>> within this or related message(s). >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "Quantum Owners Group" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected] <>. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/quantumowners/f7746385-3a1a-4d8c-b901-f6b726a67128n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/quantumowners/f7746385-3a1a-4d8c-b901-f6b726a67128n%40googlegroups.com?utm_medium=email&utm_source=footer>. >>> >>> -- >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Quantum Owners Group" group. >>> To post to this group, send email to [email protected] <> >>> To unsubscribe from this group, send email to >>> [email protected] <> >>> For more options, visit this group at >>> http://groups.google.com/group/quantumowners?hl=en >>> <http://groups.google.com/group/quantumowners?hl=en> >>> >>> IMPORTANT NOTE: All information presented herewith is provided on an "As >>> Is" basis, without warranty or the implication thereof. Neither the Quantum >>> Owners Club nor the individuals associated with the Quantum Owners Club or >>> in the preparation of the above information shall have any liability to any >>> person or entity with respect to liability, loss, or damage caused or >>> alleged to be caused directly or indirectly by the instructions contained >>> within this or related message(s). >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "Quantum Owners Group" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected] <>. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/quantumowners/605cac02.1c69fb81.6c006.721fSMTPIN_ADDED_MISSING%40gmr-mx.google.com >>> >>> <https://groups.google.com/d/msgid/quantumowners/605cac02.1c69fb81.6c006.721fSMTPIN_ADDED_MISSING%40gmr-mx.google.com?utm_medium=email&utm_source=footer>. >>> -- >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Quantum Owners Group" group. >>> To post to this group, send email to [email protected] <> >>> To unsubscribe from this group, send email to >>> [email protected] <> >>> For more options, visit this group at >>> http://groups.google.com/group/quantumowners?hl=en >>> <http://groups.google.com/group/quantumowners?hl=en> >>> >>> IMPORTANT NOTE: All information presented herewith is provided on an "As >>> Is" basis, without warranty or the implication thereof. Neither the Quantum >>> Owners Club nor the individuals associated with the Quantum Owners Club or >>> in the preparation of the above information shall have any liability to any >>> person or entity with respect to liability, loss, or damage caused or >>> alleged to be caused directly or indirectly by the instructions contained >>> within this or related message(s). >>> --- >> >>> You received this message because you are subscribed to a topic in the >>> Google Groups "Quantum Owners Group" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/quantumowners/h0WcBPGGEmI/unsubscribe >>> <https://groups.google.com/d/topic/quantumowners/h0WcBPGGEmI/unsubscribe>. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected] <>. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/quantumowners/F9F61C313F874DC69459BA51EB68A588%40JimQuad >>> >>> <https://groups.google.com/d/msgid/quantumowners/F9F61C313F874DC69459BA51EB68A588%40JimQuad?utm_medium=email&utm_source=footer>. > -- > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > <http://groups.google.com/group/quantumowners?hl=en> > > IMPORTANT NOTE: All information presented herewith is provided on an "As Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or in > the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or alleged > to be caused directly or indirectly by the instructions contained within this > or related message(s). > --- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/quantumowners/4ccd9719-0212-4222-ad27-68cba4df9db5n%40googlegroups.com > > <https://groups.google.com/d/msgid/quantumowners/4ccd9719-0212-4222-ad27-68cba4df9db5n%40googlegroups.com?utm_medium=email&utm_source=footer>. > > -- > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > <http://groups.google.com/group/quantumowners?hl=en> > > IMPORTANT NOTE: All information presented herewith is provided on an "As Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or in > the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or alleged > to be caused directly or indirectly by the instructions contained within this > or related message(s). > --- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/quantumowners/AE57CB51BBC943449921CDFE3637B16E%40JimQuad > > <https://groups.google.com/d/msgid/quantumowners/AE57CB51BBC943449921CDFE3637B16E%40JimQuad?utm_medium=email&utm_source=footer>. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/43495269-9A93-4C02-B2A5-FE6EB3A90E18%40gmail.com.
