Hi, has anyone cut out the metal work in the sill and A pillar on a saloon. I want to keep Q for next 20 - 30 years if I can, but its already badly rusted in A pillar and has hollow sound on passenger sill where metal has dissolved : - So about to get handy with an angle grinder and remove what I think is the fibreglass holding in the inner sill and A pillar to see the extent of corrosion. I feel confident I can do it , or get help doing it - but would firstly like to know if anyone has advice about this major surgery and what metalwork would need prefabricating to return the structural integrity, any pitfalls? I noticed a link for the proboards forum , but alas my 3 applications are all still pending approval. I can attend Stoneleigh to discuss - but unfortunately not in Q until its structurally right again.. Rick
-- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/8728d601-27da-459a-8e90-9a3994ce57edn%40googlegroups.com.
