Hello, After upgrading from R3.0 to R3.2-rc3, I am no longer able to hotplug ExpressCard devices (e.g. USB 3.0 adapter). Is it a bug or feature?
When I connect adapter to running Qubes, nothing happens - it is not detected, not reported by lspci, also there is nothing in dmesg. When I boot Qubes with already connected adapter, it is properly detected, attached to dom0, and works fine. But if I disconnect it, it is still reported by lspci as connected. As a workaround, I have to manually rescan PCI bus after connecting adapter: $ sudo sh -c 'echo 1 > /sys/bus/pci/rescan' And manually remove it after disconnecting: $ sudo sh -c 'echo 1 > /sys/bus/pci/devices/0000:05:00.0/remove' It works, but it is not very handy :-( Regards, -- yaqu -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to firstname.lastname@example.org. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/20160918174059.6C803202186%40mail.openmailbox.org. For more options, visit https://groups.google.com/d/optout.