Hi I am trying to install on the following machine. Asus ROG GL752VW-GS71-HID6 Metal Grey 17.3" i7-6700HQ 2.6-3.5GHz Windows 10 (960M 4G/256G SSD+1T HDD/32GB RAM/DVDRW)
Windows and xubuntu run fine. (just run xubuntu 15.10 off a usb so far) I dd'ed the Qubes-R3.2-x86_64.iso to a usb and then ran the install. Needed secure boot turned off in bios (ESC) key to get in. I installed on to the hard drive rather than the ssd, since it was empty and I was testing the install. I did not ecrypt the install so I can modify it from ubuntu. The install was nice apart from not recognising the touchpad (got caught in a help screen and had to connect a mouse to escape). On reboot it does not boot. The Q graphic screen is shown. then it hangs (the cpu fan was going full blast) Sorry did not write down the error message (something about cpu timming???) Tried rebooting into xubuntu from USB, and I could see all the files in the qubes install. Rebooted, and qubes went on to the next stage of the install??!! -create default system qubes etc etc Got a Dom0 error /usr/sbin/service , qubest-netvm start failed sterr Redirect to /bin/systemctl start qubes-return.service Job for qubes-return.service failed because the control process exited with error code See "systemctl status qubest-return.service" and "journalctl -ve" for details hit ok, showed qubes as ok, but went back in to look and had to wait whilst it went through the set up process again and came up with the same error. Then finished install and rebooted Came up fine, was trying to figure out how to get network to work. Decided to try a reboot. Reboot - hung at end of Q screen power down Reboot - hung at end of Q screen power down boot into windows OK reboot - hung at end of Q screen Suggestions on how to turn off the Q screen and see what is happening behind the progress bar, and any logs that would be helpful. Thanks Ronald -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/b0a7fe64-e196-460d-baf5-290e484820b4%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
