On Wednesday, 7 December 2016 00:25:02 UTC, Marek Marczykowski-Górecki wrote:
> > Is there a way on the first boot after install prior to configuration to > > set nouveau.modeset=0 > > You can add it from grub menu. In UEFI mode (where grub is not used), > just after installation - before reboot - go to tty2 and edit > /mnt/sysroot/boot/efi/EFI/qubes/xen.cfg and add nouveau.modeset=0 there > (not sure if its mounted at exactly /mnt/sysroot - see `mount` output to > be sure). > > > The configuration stage on first boot hangs and is buggy, and I would like > > to have a clean boot to configure, I have access to the /boot and so can > > alter config files. There is a big kernal config file, but no command line > > parameters, and the boot seems to be immediate with no grub delay. > > No grub - you're probably using UEFI. See above. > > - -- > Best Regards, > Marek Marczykowski-Górecki Big thanks, I had to mount the /boot/efi under linux because there was not enough time to edit before it crashed. Would have been much better to have edited it during the initial install as you suggested :) Regards Ronald -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/2c4d479c-056f-4ae1-b137-bcdfe775662f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
