On 01/09/2017 01:03 PM, Bernhard wrote: > Hello, I am not expert, but often such differences are explained by > the following calculation: 1 KB is 2^10 = 1024 bytes and not 1000. > While this difference is little, in third power it becomes big: 2^30 > * 53= 56,908,316,672 so *real* 53 GiB are approx 60 * 10^6 bytes > which sometimes are called GB al well ... Bernhard > > On 01/09/2017 12:02 PM, dumbcyber wrote: >> I built Qubes on a 64Gb USB stick. I then successfully cloned the >> stick to an external SSD drive using Clonezilla. The SSD drive is >> 500Gb in total size. >> >> As a result my /dev/mapper/qubes_dom000-root on the SSD is only >> 53Gb in total size according to "df -h" in dom0. >> >> I used gparted on another linux machine to extend the size of this >> partition (qubes_dom000) to the full size available. Gparted then >> shows 57Gb used and 360Gb free. >> >> I boot off the SSD into Qubes and run "df -h" again but it still >> shows only 53G total size. >> >> Is there a "right" way to extend the size of >> /dev/mapper/qubes_dom000-root, if in fact its at all possible? >> >> Thanks in advance. >> > The problem here is not the rounding (yes, usb pen drives are usually measured with the SI interpretation of the multiplication prefixes) but the enlargement of the filesystem.
dumbcyber wrote that he correctly adjusted the partition size, but that's not enough; the filesystem on it has to be resized as well. I'm not an expert with lvm either, but online guides can be found on resizing LVM volumes and filesystems... -- Alex -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/003e7d72-9646-8029-8b09-5a3294b73762%40gmx.com. For more options, visit https://groups.google.com/d/optout.
